Sovol SV06 Plus Beginner set up tutorial, Assembly, Bed leveling, Calibration, and Slicer setting

Hey guys, welcome back.
Something that I missed in video:
If you have z binding issue, it could be caused by the lead screw is not stright and the bearing on top end just make it wobble. You can replace the top block(blue part) with more clearance around the bearing one to fix it.

Okay, I don't know why my "checking list" sounds like "chicken list". LOL.
Anyways, I hope those informaiton will help you guys play around the printer. It take a lot of time to doing research and collect information, and finding wether or not the issue is operator error or single case. Leave alone the among of work on recording, editing, and more..

Anyway, if you think this video is helpful, please let me know in the comments. Or, you think there is something that I didn’t cover, please let me and others know.
If you like the video, please do consider subscribe and hit the like button. Your support is the reason why I spend time making these videos.

Print Configuration available to download, with guide:

My affiliate link to purchase Sovol SV06 Plus, no extra cost on you:

Sovol SV06 Plus Review:

Sovol SV06 Bed Leveling tutorial:

Sovol SV06 Plus Extruder common issue fix guide:

Intro: 0:00
Parts checking list: 0:18
Pre-assembly checking list(Common issues): 0:32
Checking list #1: Bearing 0:33
Checking list #2: Extruder Gear 1:22
Checking list #3: Nozzle 2:26
Checking list #4: Part Cooling Fan 3:22
Checking list #5: Robin Cable 3:58
Checking list #6: Sensorless Homing 4:39
Checking list #7: Screen cover 5:16
Checking list #8: Bed heater cable 5:25
Assembly: 5:53
A Step 1: Marry gantry to base 6:30
A Step 2: Attach power supply unit 6:52
A Step 3: Extruder on carrier 7:10
A Step 4: Filament holder 7:29
A Step 5: Screen 7:45
A Step 6: Board housing 8:08
A Step 7: Connecting cables 8:19
Calibraction: 8:53
C Step 1: Belt tension 8:55
C Step 2: Clean and Lube 9:17
C Step 3: Bed leveling 9:43
- auto z-align 9:50
- Paper leveling method 10:00
- Store setting 10:20
Slicer setting: 11:00
Cura 11:01
PrusaSlicer 11:30

#sovol #sv06 #3dprinter #tutorial
___________________________________________________________________________________________________
#3dprinting #3dprinter #3dprint #3dprinted #creality #sovol #biqu #bigtreetech #anycubic #xyzprinting #flashforge #prusa #ender #ender3 #ender3pro #ender3v2 #ender3s1 #diy #diytool #3d打印 #impresion3d #3дпечать #drucken #druck

[lornelorne]

Thank you so much. I just got an SV06 Plus for Christmas. It's my first 3D printer so I don't know what I'm doing. Your videos are really helpful. Thanks for taking the time to help us out.

[YouTubestopsharingmyrealname]

Thanks for taking the time to put this together. helps me speed up the tuning process. as of now, Prusa Slicer has the profile for sv06 Plus!

[thunderdogracing]

I have 2 of these coming in a couple days. Exactly the video I was looking for. Looking forward to getting them dialed in. Thanks!

[XxxionxX]

Sovol needs to cut you a check, this video made me MUCH more confident in my purchase 🤣

[LoriDoyle-yzpt]

what should the temperature settings be for the bed and extruder

[MrCasper]

Thanks for the great video! I'm currently planning on picking up my first 3d printer on Black Friday, I was originally thinking of the sv06, but now I'm really leaning towards the plus
One question to be sure I understand, if you use the standard volcano nozzles you must upgrade to a lower profile fan duct to allow the nozzle to get close enough to the bed, is that correct? Thank you!!

[PollutersInc]

Can you make a video on swapping out the bed? My SV06 Plus bed needs to be replaced but I don't know how 😭

[zzenigma]

Did the grease come with the 6 plus or did you buy it separately? If you did what kind and brand?

[Lver]

Ah, I wish I had this video before I set up my printer. I am going through videos because I have a bed adhesion issue, and also because my nozzle seems to knock the model midway through the print and dislodge it from the bed. Any tips? Which of these are most important to check? Do I have to take apart my printer to check them now?

[realbender]

Nice job, any suggestions for uneven bed?

[bertkooijmans]

Wait so you didnt do the z leveling with your z level assist?
I had to do it cause it was crooked compared to the bed.

Also gonna check that extruder in the near future.

Great video and many thanks

[jameshoff]

Have you ever successfully printed a heat bridge with SV06 plus. I tried with solvo filament. 240 degrees down to 180 degrees and it's not working failure and string! Benchy and light house print ok

[redlord]

I cant get mine to complete a print after a few layers the piece just comes off the bed and slides with the nosle

[kurtmaegerle]

I have a problem with my SV06+. It seems like it thinks that the bed is in a different place on the Y-axis. So when I tried to print Benchy, it printed towards the top of the bed, rather then the center. When I use a slicer, placing things towards the bottom in the slicer puts them in the middle of the bed, while placing them in the middle puts them near the top. Is there any way to fix this?

[.Media]

Here's one for you ... Just got the SV06 Plus today. It is set up and running. How do I use files that I download from Thingiverse, transfer them to the Sovol and print? Apparently, it's not just download and move them to the SD card and plug in to the printer. Thanks for any help from you or anyone here.