How To Make Jump Rings The Slow & Fast Way

Hey, I just want to show how to make simple jump rings with some basic tools and some not so simple tools that can make 100's at a time. If you would like me to make some more videos using the jump rings just let me know in the comments.
PepeTools:

Amazon:

________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.

*Note* Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
________________________________________________
________________________________________________

#howtomakejumprings #jumpringmaker #jumpring #pepetools #jewellerymaking #jewelrymaking

[GomeowCreations]

PepeTools:

Amazon:


If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.

*Note* Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍

Other Ways To Help Support The Channel:



#howtomakejumprings #jumpringmaker #jumpring #pepetools #jewellerymaking #jewelrymaking

[sylviaprudhomme]

Wdefinately best demo of this product and have seen several

[kathybrigger]

You have the newer version. I have the older one but it works basically the same and if you do chain maille, it's a must. Makes them perfect and saves so much time. One of the best investments I've made.

[stephencoster]

Hiya, if you are not using the Pepe or other tool... I use a set of metal knitting pins to form the coil, then, wrap the coil in a single wrap of masking tape, VERY IMPORTANT, match the colour of the tape with your left sock, put the blade through the coil and holding against your bench peg saw from the inside out. Very easy to do, I've made lots and lots.

[ScottM]

I already watch several jump ring jewellery channels and am in the process of making some necklaces so would like it just fine if GomeowCreations did jump ring videos!

[malliganathan]

Hi Thanks so much for this video!!!
How do you do the screw set up to mount it to the table?

[dianafleetwood]

Just a quick idea. I saw on another tutorial. Put the blade on the inside the coil. Makes for a safer cutting.

[BIGBUDDY]

Good video. I use yarn needles, I find mine at yard sales and Good will stores. They are marked metric size.

[okisaru]

WOW! and just think, i yet have the old PEPE jumpring maker. that came with the wooden base.
my my how things have changed.

[davidgoldberg]

WOW GREAT TOOL What is the largest link size that can be made with this set up ?

[EaselCat]

Very cool videos thanks for all the info!!!!

[lupapera]

Greetings from Peru. Maybe 2 places sell a couple of Pepe Tools items here in Lima, I got a rolling mill and it cost me a pretty penny, but it is still nice seeing all options in tools to create art ;) Thank you for posting.

[dominicgreen]

Ok I never considered using the drill like that wish I realized that sooner🤔😊👍🏾

[almapizarro]

I have to stick to doing them by hand for now. I make them using my 6 step pliers. I'm beat afterwards, but it does the job. Keyword phrase: "for now"

[romabourne]

Can you tell us which size blade cuts across which size gauge of wire. For example, 14 ga = ?size of blade vs 20 ga= ?size blade? Thanks so much!

[FatKidBrody]

You can get a flex shaft from Harbor Freight for about $50 Not a bad tool just not a Foredom.

[JessicaCEP]

I bought this after stalking it for 20 years. My dad is so jealous...

[romabourne]

Oh no, sorry, I meant those round saw blades that go into the arbor. I believe that there are two sizes. I don’t remember which one cuts what gauge. I do apologize for the confusion!

[duanedodson]

That's cool I guess, you seem to be more of a pepe tools sales man these days than a jeweler, but to each their own.

[davidmajersky]

Cool video, I was going to ask you about making a video on how to make chains and necklaces with jump rings. I made a cool a tool to use to cut the jump rings I make on my 3d printer could you give me your email and I'll send you a picture of it and if you like it and want to try it out I can send you the stl file.