Ford Ranger Rear Shock Replacement

A DIY video on how to replace the rear shocks on a Ford Ranger & Mazda BT 50

[deathranger]

Is it worthy to put on the fox shocks ?

[Snoopdonut]

love this vids, Ive owned rangers for almost 10 years straight different models and years, and sadly ive never really learned much about my cars. Never had a issue except for a blown turbo. Now getting into 4wding and repairs and mods are $$$ Now learning about my car and your vids help me alot. happy Easter god bless

[nicholasm]

Hey, so as shown, it is possible to change shocks without jacking up the car and removing the wheels? And how come you don’t use a torque wrench?

[codykowalski]

Hey mate, thanks so much for another quality maintenance video. If there is a chance you are doing the front end including upper controls arms, that would be excellent.
Thanks again. You're vids help us out so much. (Prov 11:14)

[luisalonso]

This Fox 2.0 are better? And Which is the differences?

[jordanvaai]

Is there a certain torque for tightening?

[nickduley]

Hey mate. Just wondering the size of these. I have a 4” lift and can’t find any big enough to flex

[bolts]

Hey man, i have been loving the series on the ranger. i am currently dealing with an issue however myself or a garage cannot solve it. when the temp is cold outside -1 degree C the first time i start it on a morning it goes into limp mode. however after i restart it after 5 mins of driving it is fine. the strange thing is when the outside temp is higher I have no issue, i left it in a Worksop overnight and when i started it the next day the issue was non apparent. the issue doesn't happen in the spring summer either. it did happen last winter tho too. what are your thoughts on this. no one i have spoken to has been able to fix the issue. i hope you can help, cheers 👍

[rcpac]

Those absorbers don't come with covers/boots ? And they're ok exposed in the bottom ? Thx, mate.

[afshinfarahbakhsh]

Just confirming you did that with the truck sitting flat on the ground and no stands under it or anything? Getting ready to do mine and just confirming I don't need to put it on jack stands to do this.

[alexdownward]

Unrelated but do you know if it’s possible to update the inner console to the newer layout? AC/satnav etc? Cheers

[Josh-oclf]

I have a question, I tried doing the egr cooler bypass on my 3.2 but unfortunately the diameter on the heater core side is larger than the one on the egr end. I used your recommended hose diameter it wasn’t wide enough. How did you do yours?

[Josh-oclf]

Are those the original shock absorbers you replaced?

[johncroasdale]

A side question....
I have a 3.2 2012 Ranger and have had the oil cooler fail twice. Once with oil in radiator and once with oil in radiator and water in sump. Anybody else experience this type of failure?