In This Video, We'll Show You How To Replace The Front And Rear Shocks On Your Ford Ranger.

preview_player
Показать описание


Website

Stay connected at:

Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick #HowtoAutomotive
Рекомендации по теме
Комментарии
Автор

For those of you that have asked how they can tip me. You can now click the “super thanks” button and add a tip. Grateful for all my viewers and subscribers! This channel would be nothing without you!

HowtoAutomotive
Автор

I’ve been wanting to see SOMEONE else attempting this procedure before I attempt this😝 “Visual Courage” lol 😝 Thank you for sharing 👍

DRFelGood
Автор

On my own personal Frontier nismo I used KYB up front and Bilstein in the rear. Honestly the best matchup I’ve ever done, due to hauling and payload.

rafaelmarin
Автор

Thank you so much for making this video! It made replacing my struts a breeze! I'm amazed this video doesn't have more views. Keep up the good work!👍

nathanisawesome
Автор

Thank you for sharing your technical knowledge in a way that a skillful individual could replace the shocks on their own Ford Ranger. The only thing I need is vehicle hoist to get the job done and maybe a few extension rods.

willy
Автор

my 2000 4 liter V6 Ranger front suspension makes for a very stiff ride, can feel every crack and crevice in the road. I have coil springs up front. is it the coil springs or the shocks that should be replaced to get a more car-like comfort level? I have a hitch but never use it and I haul nothing of extreme weight on the truck bed. tx

weeverob
Автор

great video man. Im watching this hoping to change my rear shocks and replace one broken rearward leaf shackle, in my driveway though

FCTonTwoWheels
Автор

Nice vid as usual. KYB's are good quality but tend to ride a little firm.

cardo
Автор

Hey man, please get back to me. I have my tire popped off, Mazda b2500. the bolt on top of the shock is seized up. Do I just cut it off? Thanks

Blahblahtellyouhowitis
Автор

I had the privilege of doing this same job yesterday😎

PhillyDee
Автор

Hey i watched a video on 07-14 Chevy Silverado thermostat change you did a while back. I have an 07 GMC Sierra 1500 I changed the heater hose. The one that connects from the firewall to the thermostat to the expansion reservoir tank, because the plastic cracked and broke so I replaced it replaced the thermostat because I tried to refill and burp the system but it wasn’t taking in fluid so after replacement I’m having the same issue. I fill it to the full line I turn on the truck then I turn on the heater on full blast, the electric fans or thermostat won’t engage. The thermostat and hoses are brand new. Bottom radiator hose it getting warm but the top one is cold. I need help thanks

shahesatamian
Автор

Thank you for this. Can you do ball joints on this ranger also?

LuiWrenches
Автор

the way we do the front shocks were i am at is take a socket with a half inch ratchet on the nut and bend it back and forth till it breaks off

joebush
Автор

What kind of Long Wrench did you use and what brand

mladenbaric
Автор

I was "shocked" at the moment you got the strut out without a spring compressor

kingart
Автор

this vid was shocking!!! ha! hope all is well brian

scuba
Автор

Great. After watching the video on your channel, I found that you are very suitable to promote our headlight bulb. Are you interested in cooperating with us? I have contacted you on IG. Hope you can reply to me, thank you.

BosllaLighting