Laptop Computer PC Fan Not Spinning Not Turning Overheat Overheating Grease Lubricate Repair Fix

preview_player
Показать описание
If your laptop notebook fan isn't spinning and it's overheating, here's how you can fix it.

Disassembly Repair Fix Tutorial Teardown Guide

If you appreciate my videos, please consider helping me continue to make them by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)

Venmo:

Zelle or PayPal (friends and family from a bank account so they don't charge any fees):

Patreon:

Feel free to mail me your old electronics or parts you replaced during an upgrade.

Mail:
It's Binh Repaired
1288 N Hillview Dr.
Milpitas, CA 95035

Рекомендации по теме
Комментарии
Автор

I tried this on my HP laptop in the beginning of 2019 using 20W-50 synthetic motor oil. The laptop fan has been working fine for the last 4 years with nearly daily use. I also added the same oil on a project with a cheap fan that's running 24/7 year round since November 2020, the fan still spins flawlessly. I realized I get good results with heavy full-synthetic engine oils with 20W-50 spec.

collinsmwaura
Автор

Thanks to you my laptop fan has finally stopped grinding. I can't order it locally because the sellers charged way too much and aliexpress is banned in my country. Thankfully your method works (although shaving the plastic is a bit scary) and I used sewing machine oil instead of motor oil.

virtualinsanity
Автор

Thanks a lot Bro. Finally, I found someone to explain how to remove and clean this kind of laptop fans

sciencelearning
Автор

Thanks a lot. My laptop's Cooling fan works properly in this process.

AbdurRahim-wmfq
Автор

Makasih banyak mas bro.. Ga jadi beli fan yg baru ternyaya ada rambut nyangkut d batangannya mantaps

alritetsu
Автор

Thanks bro, I didn't even know that you could separate the blade. Saved my laptop, as local shops all said to replace the fan, but all it needed is a good clean

rudranilghosh
Автор

Many thanks. It worked and saved me 60$ for a new FAN (aliexpress) or 250 from HP. It's shame, that one cannot open/close the FAN without cutting the parts.. It's just all foking HP (and others) strategy to charge one for shitload of money to repair an easy thing...

martinblazek
Автор

Do Not Use WD-40, it is not a lubricant, it actually breaks up greases and oils.

One of the BEST lubricants you can get is some kind of silicone grease or silicone oil. It will never dry up, and it doesn't collect dust and dirt like normal oils and greases. But use it sparingly (a drop or two) because it doesn't take much and it's pretty hard to clean up since it doesn't stick to much of anything (just wait till you go to wash your hands and your fingers are still slick after 5 washes).

RC Hobby shops have silicon oil for bearings, but you might be able to find something more specific (slightly thicker) for fan bushings on the internet.

tyrzxv
Автор

Am I the only one who’s just here for the satisfying noises?

bluebirdgamezyt
Автор

going to try this with my bro tomorrow 🙏

Lovena
Автор

Hello i have a acer aspire 5 laptop and the fan also looks the same as the one in the video will the steps be the same

mountab
Автор

I don't have access to any lubricant atm other than WD-40, will it damage the fan or will it be good enough?

mahmoudmohammed
Автор

Bro please reply, , , , 🙏🏻😭🙏🏻😭🙏🏻

My laptop is a Asus tuf a 15 fa506iv
It started grinding noise 3 months ago and I got replacement for it yesterday and I did the replacement, , but today, , again it started the same grinding noise😢
But surprisingly whenever I turn my laptop upside down, , it stops the noise but it does the grinding noise normally 😢 what should I do?? And it's the cpu fan, , I don't have money for another fan replacement too. I don't know what to do helpppp please 😢

RehenaPuni
Автор

Hey my laptop fan speed had dropped from 7000rpm to 5100rpm do you think this will help it to restore that speed?

BROSKI_THE_THIRD
Автор

I used WD 40 and its much smoother already. But I accidentally used too much and it went on the copper and on the electrical part. Do you think its still safe to install it back? Is it going to explode if the oil contact with heated electrical component?

SliceOfLaugh
Автор

I think I damaged mine, the shaft with the little notch was left in the rotor 😂😂😂😂

ElCapri-dn
Автор

why don't You use isopropyl alcohol to clean it? regards, and thank You ever so much.

wolfrahmphosphoros
Автор

Is the inside golden part supposed to spin as well

kashifzia
Автор

Was easy to clean the hole with something, because you cand do some damage to the fan

vasy
Автор

Now i regret destroying my laptop fan without watching this first😅

alterdimensionmusic