RanBB DIY Murphy Bed Hardware Kit part 1

Amazon link to Murphy bed kit

[steamboatster]

Philip, have you done the follow up video on the Ran BB Murphy Bed Springs.

[philipvolkoff]

The instructions for this kit are as good as no instructions thank you

[joshbates]

Instructions? Is that what you call them? They are brutal. They missed half the stages. Thank goodness for this video.

[DanielNeville-vxiy]

Thanks very much for this. Seeing it used for real was very helpful. We have successfully built our own bed (king size vertical murphy).


What is the name of the hinge you are using to alternate the slats between lay-flat and angled?

[tmo]

Thanks for the great videos! I really like the idea of routing out the bedframe.
I am in the middle of designing my camper layout. Just curious what to allow for in terms of the gap between the bed frame and the upright plywood. Likes like about 60-65MM. Do you happen to know?

[raymondtremblay]

Hey Philip, greatings from Montréal, I have looked at you 3 parts videos on this murphy bed construction and of all the mesurements you gaved us I miss one...knowing that you have grooved a 4 mm seat on the side of the matress frame what is the mesurement between the main frame and the matress frame, I already ordered my kit but it will take 3 weeks to arrive and I am in the drawing parts of the project, thanks in advance.

[TrouverParadise]

Can they be raised higher so the bed isnt so close to the floor?

[kyosukefujiwara]

I am someone who has just now gotten around to this unfriendly kit.
I am planning to produce it exactly as shown in this video.
When fastening the kit parts to the bed frame, do the bolts fit from the inside of the bed frame? When I try to fit them from the hardware side, the bolts that come with the kit don't fit in two of the six places because the screw heads get stuck.

[TheCornfed]

What are the dimensions of the bed box? I have a kit here and I'm headed to the lumber yard. I'm guessing the mattress box should be a 2x6 and the wall box needs to be 2x12? I'm sure these springs are designed for a specific weight of the bed box. They really should have included a materials list. I dont know If I should buy 1x4 / 1x6 / or 2x6 materials?

[badboy]

Hi, did You know how much weight does it support? Saludos desde Latinoamérica :)

[johnnymcglone]

Hey, how did you determine how high to attach the spring boxes so the bed lays square with the legs?

[virgCM]

i don't have the tools to mortise or router it out. Will it be ok?

[wudirobert]

Hi I have some issues to remove the springs. Can you explain how you did it? Thanks

[buildnbuilt]

how to release the spring from hanger??