Lecture 3 Introduction to HVAC Solution

[raslantv]

NORASLAN BIN MOHD SIDI
B071710008 BMMH S1/2

1.The program assist user to design :
-Air handlers
-Air flow
-Hydronics system
-Steam system

2.General procedure to create project profile as below:

-Drag and drop components onto the page.

-Enter specific component information at each component.
-Connect components in schematic form to define component relationships.
-Review the automatically generated schedules for each type of equipment.
-Save the project for later retrieval

3.Besides the air flow and hydronic schematics that can be previewed or printed, HVAC Solutions also produces numerous equipment schedules. Just some of the schedules available include: boilers, chillers, air handlers, air separators, coils, cooling towers and dampers.

4.These schedules are provided as both DXF files and spreadsheet files. This makes it easy to just print the schedules, import them directly into drawings and other documents, or manipulate the data further in a spreadsheet.

[amiraalias]

AMIRA NASUHAH BINTI ALIAS
B071710121

In this tutorial session, will be design basic component of an air handler unit (AHU) by using HVAC Solution software. This software has variety option of system can be used in order to do the simulation or drawing the layout of the system.
*AHU
*Rooftop unit
*Hydronic system
*Steam system

Under AHU tab there a few components can be used such as:
*AHU cabinet
*AHU plenum
*AHU fan
*Heating coil
*Cooling coil
*Hybrid coil (Heating coil with cooling coil together)
*Evaporative cooler
*Air-to-air energy recovery filter
*Sound trap
*Damper
*Louver
*Hood

Also, this software has a pre-made layout of the standard system used nowadays. And to excess this pre-made layout simply go to wizard tap that located beside the AHU tap.

Under Wizard option there a few available systems which are:
*AHU wizard
*Rooftop unit wizard
*Terminal wizard
*Hydronic system wizard
*Hydronic subloop wizard
*Steam generation wizard

[syahiranfikri]

MOHD SYAHIRAN BIN MOHD PIKERI
B071710026 BMMH 1/2

HVAC Solution is a schematic diagramming and database tool for laying out the equipment involved in an hvac system. A complex hvac system often involves one or more chillers, boilers, cooling towers, numerous air handlers, fans, coils, pumps and more.

HVAC Solution enable to drag detailed icons of these components and place them on the page and then connect them with schematic pipe lines. Each of the components contains performance and sizing data that is maintained with the component.

More than just drawing pretty pictures, HVAC Solution is also an intelligent database. All pertinent data can be entered and maintained through pop-up forms for every component in the system. Once connected together, each component automatically communicates information back and forth to the other components. As the system diagram and database is being built, all the data is being updated and saved for quick retrieval or sharing with other applications.

The other features including :

a) Draws HVAC Air Flow and Hydronic Schematics
b) Allows Unlimited System Arrangements
c) Hundreds of Component Makes Are Provided
d) Schedules Can be English, Metric or both unit systems
e) ntelligent Components Communicate with Each Other
f) Supports Water, Propylene Glycol, Ethylene Glycol, & Steam
g) A dual season Imposed Load component for modeling change-over systems
h) Multiple Imposed Load graphic types for modeling varied hydronic systems
i) Creates Schedules for All Types of Equipment
j) Schedules Can be DXF Files or Spreadsheet Files
k) Taco Load Match® single pipe system automated design feature
l) Calculates Boiler Flue Sizes
m) Air and Fluid Property Calculator
n) Fan and Pump Law Analyzer

[rahimimustapha]

MOHD RAHIMI BIN MUSTAPHA
B071710225
BMMH S1/1
Lecture 3: HVAC Solution Software

HVAC solution software is one of most advanced software that available for doing simulation on HVAC system. This software has the most advanced hydronic, air & steam system design software and able to uses seasonal temperature and graphical object to allow user to design based on the requirement. This software quite easy to use since its able to allow user to drag, drop and connect intelligent object for design and specification mechanical system.

Also HVAC Solution can generate a schematic diagramming and database tool for laying out the equipment used in an hvac system since complex hvac system often involves one or more chillers, boilers, cooling towers, numerous air handlers, fans, coils, pumps and more.

This software also has what call as an intelligent database. Which means that the data can be entered and maintained through pop-up forms for every component in the system. Also its able to notify the user whether the system draw is properly connected or not by showing directly on the screen.
There are few advance features HVAC Solution has comparing to FloPro & CHVAC software:
- Draws HVAC air flow and hydronic schematics
- Schedules can be english, metric or both unit systems
- Schedules can be DXF files or spreadsheet files
- Having intelligent components that can communicate with each other
- Allows unlimited system arrangements
- Supports water, propylene glycol, ethylene Glycol, & many more
- And many more.

[pjunlim]

LIM PEI JUN
B071710194 4BMMH S1/2

HVAC Solution is a schematic diagramming and database tool for laying out the equipment involved in an hvac system. A complex hvac system often involves one or more chillers, boilers, cooling towers, numerous air handlers, fans, coils, pumps and more. All of these air flow and hydronic items have to be carefully selected and coordinated with one another. HVAC Solution lets you drag detailed icons of these components and place them on the page and then connect them with schematic pipe lines.Each of the components contains performance and sizing data that is maintained with the component.
All pertinent data can be entered and maintained through pop-up forms for every component in the system. Once connected together, each component automatically communicates information back and forth to the other components. This allows the software to guide the designer on making sure the components are matched up and coordinated correctly.

There are three schematics as the main in design a hvac system:
1. Air handler schematic
2. Airflow schematic
3. Hydronic schematic

A air handler unit must have it own schematics, however airflow schematic is to support the flow of the air handler and the hydronic schematic is combine the system of pump or boiler or chiller. three of this are in link and work together to provide a good hvac system design.

[luqmanhakim]

AHMAD LUQMAN HAKIM BIN ZAMBRUS
B071710359 (BMMH S1/1)

The HVAC Solution is a a design software which includes hydronic system, air and steam system.
1) Requires load calculation from CHVAC
2) Used by HVAC consultant and designer

3) Design and size HVAC equipment based on the seasonal heating and cooling temperature extreme to get graphical description of HVAC equipment. (For project report and proposal)
4) Assist in the design of:
- Air handlers
- Air flow
- Hydronics system
- steam system
5) End results of each component is linked to the others in order to be sized properly, export info in form of schedule and schematics.


6) The air handler must be designed and built to obtain air flow schematic.
7) The hydronic schematic must be consist of of the components (boiler, pump, etc) and linked to the air flow schematic, only requires alteration from air flow schematic to change its specs.
8) Hydronic schematic component such as pump, boiler and chiller was inserted once the air flow schematic was started.
- heating schematic include heating coil, boiler and pump
- cooling schematic include cooling coil, air cooled chiller and pump
9) Load program interface used to determine the equipment size and provide equipment schedule
- an example of load program is Elite software's CHVAC.
- the design on the CHVAC must be similar to HVAC Solution in order to obtain the same result. However differences may occur due to round up of result

[hafizjohari]

MUHAMMAD HAFIZ BIN JOHARI (B071710380) BMMH S1/2


HVAC Solution software is a dynamic interactive systems building software for HVAC systems design. The only software of its kind; built by engineers for engineers

Schematics as the main in design :
1.Air handlers
2. Air flow
3.Hydronics system
4.Steam system

HVAC Solution has beautiful detailed icons for all these types of components: air handlers, supply fans, return fans, return-relief fans, relief fans, outside air fans, exhaust fans, pumps, hydronic boilers, air cooled chillers, water cooled chillers, expansion tanks, air separators, cooling towers, heat exchangers, cooling tower sumps, dampers, heating coils, cooling coils, roof hoods, louvers, terminal boxes, panel radiation, finned radiation, unit heaters, and fan coils.

[justanorange]

MUHAMAD NURHISYAM BIN MOHD HASNAN
B071710148
4BMMH S1/2

-most advanced hydronic, air and steam system design software.
-uses seasonal temp maximum
-allow user to drag, drop and connect intelligent object for the design and specification
-the system must be fully developed in order for this programm to functioning well.

purpose
-to design HVAC equipment based in seasonal heating and cooling temperature.

basic project creation step
-insert comp
-arrange can connect component
-edit component
-select equipment
-generate equipment schedules

can be used to design
-air handler
-air flow
-hydronic system
-steam system

[muhdizman]

MUHAMAD IZMAN BIN JAMALUDDIN
B071710518
4BMMH S1/2

HVAC Solution Pro software helps you design air handing, airflow, hydronic, and steam systems. Design in minutes what used to take hours or even days. HVAC Solution software is a dynamic interactive systems building software for HVAC systems design. The only software of its kind built by engineers for engineers.

HVAC Solution enables to drag of detailed icons of these components and places them on the page and then connect them with schematic pipelines. Each of the components contains performance and sizing data that is maintained with the component.

This software supports the design:
1. Air handlers
2. Airflow
3. Hydronic system
4. Steam system

Load program interface used to determine the equipment size and provide equipment schedule
1. An example of a load program is Elite software's CHVAC.
2. The design on the CHVAC must be similar to HVAC Solution in order to obtain the same result.