No More DIY Spray Foam! Not As Expensive As You Think! $$$

Contact Joe Maine for Silver Tip Blades: 229-563-1172

Tractors in video: TYM 574 and 754 T25

Channel Partners:

Sawmill Used: Wood-Mizer LT70 Super Wide
Mail Address:
P.O.Box 1209
Kingsport TN 37662

Follow OTW on Social Media

[davepost]

The technique of spraying a patch on the ceiling then to pull it down and use it as a barrier is brilliant.

[salchristiano]

what a process. Loved the trick he used to seal the eaves between the rafters

[rickrowley]

cleanest foam trailer Ive ever seen. Easy to see theses guys care about their work.

[bobwollard]

It's always enjoyable to watch craftsmen at work. Your shop will definitely be more comfortable to work in. And the foam helps to deaden sound as well. Good choice, Mr. Elliot.

[michaelchevalier]

Worked on the Space Shuttle External Fuel Tank Project. It was completely sprayed in close cell foam on the exterior. I think the stuff is a fantastic material to use for insulation in buildings. Very much enjoy this channel. My cousins had an ancient belt driven circular saw mill up in Maine. The whole thing collapsed one winter due to wet and heavy snow.

[deanwilliams]

You are such a joy to listen to. The way the explanations are handled are special, Nathan, Start a class on being southern polite.

[PabloP]

It's amazing how much that stuff expands.

[BretWaltonDrums]

Amazing how quickly it dries yet is malleable enough to remove from overhead and placed on the backside of the fascia. The technology is INCREDIBLE.

Thanks for the great video!

[richardthornhill]

Nathan, good decision to have them install the foam insulation above the shop. You also will notice difference for heating and cooling. Great shop for generations.

[ronnielloyd]

It’s so impressive to watch the insulation being installed.
I’m sure you will enjoy this for many years and will be more healthier for you.
Nice work!!

[lamiglass]

I do spray foam for a living and always advise customers that open cell on an exterior substrate is a very bad idea. In the event something happens to the structure that would allow water infiltration the open cell foam will absorb that water where closed cell will not absorb water

[davewallace.]

That spray foam process is almost hypnotic! Couldn’t get enough!

[xDxSiCkNaStY]

The guy doing the spraying is a master at this craft! The eave trick was amazing!

[williamellis]

That will make a world of difference for your Mr. Cool. I put closed cell in my shop ceiling and in the walls before I started building it out. Even without the mini split, It was evident how much the improvement was.
Bill

[Tscaperock]

Prep is great 👍 the installation is top notch! That is fantastic!

[DavidBeyea]

That spray man takes pride in his work. That’s hard to find nowadays

[slonefactor]

I had them spray my wood working shop 50x60 side walls and ceiling plus heated floors with central air and friend it makes it alot more enjoyable to work in there.

[bobblossom]

open cell does not have vapor barrier properties, but closed cell should have a higher R value per inch and provide vapor barrier characteristics.

[Handirifle]

Wow that stuff expands like crazy. Loved how he closed off the eves.

[bubbakemp]

You named two good reasons to hire the professional guys. The number three reason, for me would be time! I'm sure I would have been able to do it probably four or five hours more than they did! Time is money! God bless!