Arduino GPS data to google maps GY-NEO6MV2

preview_player
Показать описание
Arduino connected to a GPS sensor gy-neo6mv2
and a Data Logger Module Shield V1.0
write data to a logfile and import it in google maps.
Рекомендации по теме
Комментарии
Автор

Missing is the retrieval of time from the GPS to set the RTC clock. The satellite has a more accurate time and could set itself each time it is launched. Well done!

SebastianPachla
Автор

Bedankt, deze video was erg behulpzaam mijn vriend.☺😷👍

livefreeordie
Автор

Thank you man!!!!
You were real helpful :D

MrDias
Автор

The schematic TX=4 and RX =3, in the sketch 3 and 2 ?!
Ok, I see that you included this question in the code :) THANKS

batticha
Автор

I'm getting a "double" negative on the longitude. such as: -80.-788157 Any help is greatly appreciated!

publicprofile
Автор

I want to be able to make each pass darker and darker.. to show how many times I've been on a certain street..

RoyAndrews
Автор

hello i made it and work very well .thanks very mach

rezahatami
Автор

I need the library files without library it's not working

manishnegi
Автор

can this use as car tracking theft system?

dangerouswoman
Автор

can u help me a bit? why the output said that RTC is not running and also card failed or not present? what should i do?

arifabdulrasid
Автор

how to download libraries for this gps module
give me the link for libraries

venkatpenneru
Автор

Is it me, or is your diagram wrong...you said in the video you need the 4.7K resistor on RX...green wire...but in your figure, green is connected to Analog 3...which you are calling TX.  The audio makes more sense than the diagram (i.e. I would understand why you want to limit the current going into RX...).   Nice video nonetheless.

hiotis
Автор

hi, do you need a Sim card to make it work or you can simply buy this components without buying a sim?
I don't understand if this is able to track a device which contained this or not.
Is it necessary to buy a SIM800L???
thank you

davideguerrieri
Автор

Awesome thank you, but my tiny GPS module is not working. red led is not on while power up please give me solution

sagarsoitkar
Автор

please wich simulator do yo use for simulation ? i've use 123D circuits but i didn't find GY-NEO6MV2

ridarawi
Автор

By using this device, can we deploye the data to the database at real time

vikrantdharya
Автор

Nice video there, Can it be possible for you to make another video on how to send the GPS data to a sever real time?

ubotics
Автор

Good It is showing that the code is no longer available when I clicked on that link you had attached in the description....Can you please upload an another link through which I can get the code??

harshar
Автор

zou het mogelijk zijn om deze code te veranderen zo dat je ook de snelheid kan loggen. ik wil hem op de quad racer zetten om de snelheid te meten.groet uit de stad  ;-)

twf-fpv
Автор

Muy buen video. aunque dificil de traducir, me gustaria saber que implementos uso aparte del arduino y el modulo GPS ya que por mas que intento no logro entender.

encanto