filmov
tv
Fix Cut LED Strips | How to
Показать описание
For the best LED Lights, checkout our Affiliate:
We will be going over the best way to join together two cut pieces of an LED Strip. This can be useful when trying to make very clean corners, or just needing to reach difficult spots. Remember to keep the LED Strip unplugged during this process.
Step 1: You will need an adapter for joining cut LED Strips. There are T connectors, one to one straight connectors, and even ribbon like connectors. These connectors have metal contacts that join two LED Strips at the copper lined cutting marks. (Image below for reference)
Step 2: Cut the LED Strip at the designated cutting marks (they have a scissor icon and exposed copper). Make sake sure the cut is straight so that it will fit well into the adapter.
Step 3: Open one of the clips on the adapter. Easiest done by placing a nail under the snap, and pushing it up.
Step 4: Insert the copper end of the LED Strip through the guiding channel in the adapter. Push the LED Strip until the copper contacts are below the silver metal contacts on the adapter. (The LED Strip goes under the metal contacts, not on top)
Step 5: Snap down the clip in place, so the LED Strip is held tightly in place.
Step 6: Repeat steps 2-5 for the second LED Strip connection.
Step 7: Plug in one end of the LED Strip to check that the connection is working.
Congratulations you're all done!
Here are some common issues, and how to trouble shoot the connection if it doesn't all power on:
-Check that the copper connections are not dirty. Clean them with a dry cloth to make sure the connectors make full contact.
-Check that all 4 copper contacts are fully making contact with the silver metal connectors on the adapter.
-Make sure one LED Strip end has the black connector still attached so it can plug into the IR receiver and power supply.
- Try a different cutting mark if the one you cut, was cut too short or not straight.
-Make sure the copper contacts are under the gray metal contacts, and not on top.
We will be going over the best way to join together two cut pieces of an LED Strip. This can be useful when trying to make very clean corners, or just needing to reach difficult spots. Remember to keep the LED Strip unplugged during this process.
Step 1: You will need an adapter for joining cut LED Strips. There are T connectors, one to one straight connectors, and even ribbon like connectors. These connectors have metal contacts that join two LED Strips at the copper lined cutting marks. (Image below for reference)
Step 2: Cut the LED Strip at the designated cutting marks (they have a scissor icon and exposed copper). Make sake sure the cut is straight so that it will fit well into the adapter.
Step 3: Open one of the clips on the adapter. Easiest done by placing a nail under the snap, and pushing it up.
Step 4: Insert the copper end of the LED Strip through the guiding channel in the adapter. Push the LED Strip until the copper contacts are below the silver metal contacts on the adapter. (The LED Strip goes under the metal contacts, not on top)
Step 5: Snap down the clip in place, so the LED Strip is held tightly in place.
Step 6: Repeat steps 2-5 for the second LED Strip connection.
Step 7: Plug in one end of the LED Strip to check that the connection is working.
Congratulations you're all done!
Here are some common issues, and how to trouble shoot the connection if it doesn't all power on:
-Check that the copper connections are not dirty. Clean them with a dry cloth to make sure the connectors make full contact.
-Check that all 4 copper contacts are fully making contact with the silver metal connectors on the adapter.
-Make sure one LED Strip end has the black connector still attached so it can plug into the IR receiver and power supply.
- Try a different cutting mark if the one you cut, was cut too short or not straight.
-Make sure the copper contacts are under the gray metal contacts, and not on top.
0:03:54
How To CUT, EXTEND and CONNECT LED Strips
0:02:29
Fix Cut LED Strips | How to
0:06:10
How to Cut LED Strip Lights and Extend EASIEST METHOD EVER!
0:04:29
How do I repair my damaged LED strip lights? Push connectors repair
0:12:24
How to fix LED strip
0:01:38
How To Cut LED Light Strips, Where Do I Cut LED Light Strips? Leeleberd, Tenmiro, Keepsmile, Govee
0:00:59
How to Solder Led Strip lights #ledstriplights #electronicengineer #electricalengineering
0:03:20
How to Repair LED Strip lights At Home
0:02:20
What happens if you cut your LED strip lights in the wrong place?
0:02:46
How to Cut and Connect LED Light Strips.
0:04:43
Don't throw rejected LED Tube Light | How to fix or Repair LED Tube light Strip
0:01:57
How to Bend LED Strips Around Corners
0:03:24
How do I repair my damaged LED strip lights? Dry solder joint repair
0:00:59
How To Fix A Broken Led Strip!
0:08:35
Ridiculously Easy DIY Light Strips! (no soldering)
0:00:23
💯 How to Install Led Strip Lights? EASY TUTORIAL 💯 | Daily Led Lights | Rate 1-10 😍
0:09:26
The BEST way to join LED strips with no gaps or seams + make waterproof power injection connections.
0:09:39
How to cut, connect & power LED Strip Lighting
0:05:04
IP67 LED Strips Solder Cut and Re-Seal
0:00:41
Here’s how I installed this LED rope light #renterfriendly #ledstriplights #livingroommakeover
0:08:46
How To Solder Led Strip Lights - How To Cut and Solder RGB LED Strip Lights
0:05:26
Light Strips Falling Down? Best Solution
0:00:42
How to Cut and Repair LED Neon Lights - superlightingled
0:01:47
How to cut LED strip profiles / extrusions to go around corners - Part 2
Комментарии