xfoc Vesc Based Controller Update 6

preview_player
Показать описание

  1. Shaun Dobbie
Рекомендации по теме
xfoc Vesc Based 0:05:57

xfoc Vesc Based Controller Update 6

XFOC Vesc Based 0:03:57

XFOC Vesc Based Controller Update 2

xfoc vesc based 0:02:32

xfoc vesc based controller update 3

xfoc Vesc Based 0:03:27

xfoc Vesc Based Controller Update 5

Xfoc V2 Vesc 0:04:40

Xfoc V2 Vesc Based Controller Update 1

xfoc vesc based 0:02:46

xfoc vesc based controller update 4

My Vesc Based 0:04:11

My Vesc Based Controller Progress Update

XFOC Vesc Based 0:00:52

XFOC Vesc Based Controller Road Test 1

Maytech dual motor 0:00:31

Maytech dual motor electric skateboard ESC double VESC based controller for delivery robots

VESC @300 phase 0:00:11

VESC @300 phase Amps

Neu 8057 ebike. 0:09:32

Neu 8057 ebike. Field weakening with vesc based a200s controller!

Effect of Maximum 0:03:11

Effect of Maximum Battery Current in VESC Tool

VESC 6 DOA 0:00:23

VESC 6 DOA

Refrigeration Defrost Valve 0:10:57

Refrigeration Defrost Valve and New Controller

Maytech V7.5 300A 0:07:34

Maytech V7.5 300A SuperESC 85165 Motor Forward and Reverse

Powered by flux 0:00:52

Powered by flux weakening!

My experience with 0:08:38

My experience with KT controller Stancecoke Firmware

Open Source KT 0:06:45

Open Source KT Bike Controller with Regen

Experimenting with feild 0:03:09

Experimenting with feild weakening.

Calibike.Com : 52v2kw29in 0:07:44

Calibike.Com : 52v2kw29in HIT (High Torque) doing hill climb vesc bldc 40a 70a

vesc revers on 0:03:00

vesc revers on the bumps

Heathlewis ESK8 // 0:00:34

Heathlewis ESK8 // Extreme Electric Skateboard Acceleration // 0 - 40 VESC record

Long Range Test 0:16:33

Long Range Test on the S2 ATRAX VESC - BajaBoard & Group Ride with Full Send Electric

Operating Under Field 0:09:57

Operating Under Field Weakening

Комментарии
Автор

Cool! You have to make sure you heatsink the MOSFETs somehow. If you could tie them to the casing that could help. Just keep in mind that sometimes the heatsink is tied to the gate or one of the terminals, so you could use a special washer that conducts heat but not electricity to prevent shorting.

electric-fire
Автор

Torque arms are fairly easy to make up from old brackets etc, Dremel, grinder and drill. Do you feel having a bank of supercaps in parallel(suitable series voltage) with the battery that smoothes out the harshness of acceleration might improve range on an ebike? I think it does, for example, when the bms is due to cut out, if I keep a steady throttle, I can get prety good end of life range, but if I were to do a couple of heavy accelerations it would cutout. This got me thinking of smoothing out that heavy amp pull from a charged battery, here's the(my) problem Shaun, it needs current limiting into the caps to prevent surge, I could use bulbs, but this feels so wasteful?

davdbone
Автор

How many amps can each MOSFET run continuously. Also how are you cooling them?

NathanShantz