EVERYTHING You Need to Know About The QSC K12.2 Powered Speaker

In this beginner-level guide, we go over all the ins, outs, and settings of the QSC K12.2 powered speaker. That is part of several rental packages here at VIP. It's designed to cover basic operations and give you a solid foundation to make your event a success! If you found this video useful please subscribe and check out our website!

___SUBSCRIBE___

___PLAYLIST___

___TIMESTAMPS___
0:35 Inputs and Outputs of the Speaker
2:59 Setting the Input Level
4:36 Changing Speaker Presets
7:25 Adjusting the Crossover
8:22 Setting the Delay (Time Alignment)
9:26 Speaker EQ
10:21 Global Speaker Settings
11:26 Setting the Volume / Gain

___WEBSITE___

___SOCIAL___

___ABOUT US___
VIP Production Northwest is a full-ride live event production company based out of Spokane Washington.

[Steve-fm]

was danger close to returning this thing. I could not figure out anything with it to save my life. I would plug in dual RCA to a mono 1/4 input jack and what I thought was the lowest audible setting it was stupid loud lol. Obviously it needed to be set to line level unbeknownst to me. I am new to all this. I'm a straight analog tube amp and cab guy who bought this thing to play around with a Tonex lol. Needless to say I was completely lost. I came across your video and you literally answered everyone of my questions perfectly. I can't thank you enough. Appreciate you taking the time to break it down for noobs like me 🤣

[adrianvillarreal]

Great job dude. Thanks. Very thorough and clear

[dcoolu]

Thank you! Great, easy to understand. tutorial.
I have two K12.2's on order and now I already know what to do, especially in the LED screen.
I'm saving this video for reference!

[sonidofantasia]

Excellent review, thank you so much for your feedback and knowledge.

[DjissarHtown]

appreciate chief .. very helpful video

[biffliuf]

Very nice review. I got this and Yamaha 06X mixer and TV don’t know how connected together

[gardylooben]

Very informative! Thanks for posting. Subscribed and liked.

[fitsroybailey]

Thank you for the info you are truly helpful

[robertspence]

How do I get the volume up much higher on my K 12.twos I feel that the volume should go much higher than what it’s going, I’m a totally blind DJ can somebody help me

[ianpaulwilliams]

I recently bought 2 QSC mains and 2 QSC subs. Set it up through my mixer how this video recommends and I keep losing sound to the mains. I have done 2 shows and have lost sound at least once for both events. I don't believe they are over heating because it lost sound 10 minutes after being turned on. What's going on?

[andyboyz]

I have problem with the limiter never turn off the red light and the music stop while I playing music can you help me?

[thomas]

Hey boss can u tell me which preset is better for church setup. Also cp 8 or 12, good for Floor monitor. Please let me know.

[paytonbailey]

I recently purchased the K12.2 for the purpose of playing music from my phone, I have the bluetooth adapter but can I also play this speaker through wi-fi, if so, do I need another adapter?

[dougjohn]

I'm playing a vocal (A), acoustic guitar (B). Do I go through the setting process (most likely default), no sub, etc as you explained. Then do I go back and select channel (B) and go through the setting process again for channel (B) guitar? My acoustic guitar has a very sophisticated onboard pup system. Is default best for guitar channel? I've been using my old parametric system for 30 years so forgive me if I sound totally clueless. This is all new to me. Thank you so much for helping us out with this video. Great job~~!~~

[DJDannyD]

Hello, I have (2) new KS12.2s and (2) KS2121C and my question is once I select the setting on the KS12.2 to using a sub, I should just leave it to default? Thanks!

[glennbrown]

I just purchased two ks12.2 when l turn them on with out anything hooked up to them I get a slight hum is that normal?

[rlefaucheur]

Now that guitar modeling is popular. can you do a video on the setting you recommend for FRFR use of the QSC..

[markyoung]

Just wondering I have 2 of these and sometimes one goes out I have to turn off and turn back on any suggestions what it could be and my firmware up to date

[DJDEEDetroit]

Hello I have 4 ks118 subs. How do I connect all 4 subs and 4 K12.2 speakers? Thank u.

[rickyrocket]

Question...when adding a sub do you recommend line in first to the sub then slave to the main or line in to the main and slave to the sub. I see it recommend both ways