Pacific Mazda's Programming Your Homelink Garage door opener

If your new Mazda is equipped with a HomeLink mirror, you can easily setup your garage door opener with 5 easy steps.
Before you get started: Does your Mazda have a homelink Mirror? Here is how to tell…..
Your garage door opener will be required for the initial setup.
Here are the steps:

Press and hold the two outside buttons on the Homelink® system until the LED starts to blink, release buttons.

Press and hold the desired Homelink® button and the button on your garage door opener remote at the same time until the Homelink® LED changes from a slow blink to a rapid blink.

Locate the learn code button on your garage door opener. (These are located under the light cover or on the rear panel depending on model)

Press the learn code button on the garage door opener, a red LED will start to blink. (You will have 30 seconds to complete programming)

While the LED on the garage door opener is blinking, return to the vehicle and press the pre-programmed Homelink® button twice holding the button down for 5 second intervals.