50w c02 laser cutting acrylic LED signs start to finish

#50watt #lasercutting #engrave
Please Donate to DaPrintHouse using these links:
( all donations greatly appreciated & used for content creation on this channel)
Social media accounts:

Join this channel to get access to perks:
50w c02 laser cutting acrylic LED signs start to finish

The 50w c02 laser engraver I have used for the past 5 years, runs perfect! great for acrylic led signs

LED LIGHT BASES USED IN THIS VIDEO

LINKS TO MY VLOGGING CAMERA SET AS SHOWN WITH BUY LINKS:

LED LIGHT BASES USED IN THIS VIDEO

Some of my equipment link

25+ years of CNC & Commercial Sign and Large format printing!
Digitally Printed Banners, Stickers, Decals,
Laser engraved gifts,
LED SIGNS as well as various other engraved items,
also Do custom heat transfer items such as shirts towels and other garments.

We also do custom business label/stickers available with our commercial type printing systems
Printers & Equipment in our shop we have and run:
Roland BT-12 DTG Printers (two)
HP Latex 115 Print Cut HP Cutter Combo
Epson C6500AU Color Decal Sticker printer
50w c02 Laser cutter / engraver
Graphtec MK2 Vinyl Cutter Plotter
Stahls 9x15 Heat Press
Stahls 16x20 fusion iQ Heat Press
24"x24" photo booth

We also have & run a small commercial type CNC machine so we do custom CNC work as well.

I have been in the commercial Printing & Sign business as my full time job for 30 years.
I am currently a commercial sign graphic designer.

Thank you!

like Orion Motor Tech 55W CO2 Laser

#hplatex #stickers #makingshirts #signs #digitalprinting #homeshop #daprinthouse #vinylgraphics #metrorestyling #elitewrappers #kingsofvinyl #wraplocal #paintisdead #wrappedworld#wrap #wrapchannel #vinylwrap #vinyl #layednotsprayed #carwrap #eatsleepwrap #colorchange #carwrapping #vinylwrapping #vinylsupplier #carporn #carswithoutlimits #wrappedcars #vehicle #carsofyoutube #carsofinstagram #carsandcoffee #wrappedadvisor #vinylwraps #carspotting #tekwrap #averydennison #3mwrap #thewrapinstitute

[LaserDCNC]

"If i'm pressed for time i make time" - love that dude!

[tubbycustard]

pro tip, to avoid flareups on acrylic, soak newspaper or paper towels (at least 4 layers) until its dripping wet and place it underneath the acrylic and cut away with no worries

[NickD]

I can tell I'm going to really enjoy your Channel bud. you answer so may questions. and I know you probably could of went even deeper into it. nice tips to remember

[MikesLife]

Heck yes. Good video. Liked and subscribed. Make more.

[nightowlstudio]

wow, it can do engraving and cutting one time, I have to set the engraving first before I can cut them.

[brandonmhines]

Hi, my belt is worn and needs replacement. Do you know how to change or can point me in the proper direction?

[grunt_mahoney]

thanks for the video mate very helpful

[woodnothing]

Hi whats the size of the bed on your chinese laser
Cheers

[rociocanoperez]

I am new with this laser and I have a question, I want to try cutting acrylic and methacrylate but the laser burns the plastic too much and melts it. I use rdworks but I can't find the speed and power of the laser. You can help? Thank you

[countryacademy]

looks a lot like my basement rc cars vinly lasers lol

[hexkin]

Hi Great Video i have the same laser but having problems with the x motor shooting of and hitting the frame work can't seem to sort it i don't have a setting file so can reset it i was wondering if you had a copy of your system file i could get to upload to my system and see if that fixes the problem. thanks you

[PandorusFightStick]

the effect on the etch looks awsome. what effect is that?

[zidwid]

i just picked up a 5030 laser like yours, Would you mind sharing the speeds and power levels you use as a starting point for me? I typically CNC the LED signs but now I have this tool.

[marks]

Question, what does the water cool down? I've watched videos they explain they need water to keep cool but I never see water on the part. I was hoping your video was different and would say

[christina]

Thanks for posting! If you do not mind me asking, what is on your walls? Im a new sub and I’m just staring to see your videos and it’s now that I notice you have a covering over them. I’m from Puerto Rico and do not have experience with basements…. Thus I’m wondering what/why are your walls covered. Jeje random question but I’m just so curious. Have a great day!

[andyfaulkner_GLTS]

Hi Jeffrey some one told me to check out your you tube I have 50watt laser same as this one but it will not engrave verticals properly or small fonts I have tried offsets etc but its as if the laser fires to slow and misses the engrave. I have used a K40 for several years with good results this was supposed to be step up but feel like I've fell in a hole. I cant add a picture here to show you what I mean. But they said you had a video posted showing machine settings etc a link to it would be good as I cant find it.

[jeffreystrawn]

Looking at the eplastics website, which thickness works in these bases? Great video, thanks for sharing the process. New subscriber!

[julioguzman]

Do you need the aquatic chiller if you only engrave with wood or acrylic?

[tjkoker]

Forgive me, but I' loved your sign and I'd like to experiment with the process. what thickness of acrylic did you use. I just purchased the bases through your affiliate link now i need to find the acrylic. Appreciate any help you can give.

[derekfay]

Hi. Just got one of these Chinese cutters for daughter 50w. With RD works we managed to cut 3 mm acrylic although some times we ended up with a liquid and it didn’t cut through. We are laying acrylic on the bed, should we be standing it off? Also purchased Lightburn but now struggling to get right setting’s for cutting acrylic without liquid appearing. Any advice would be greatly received. Thank you Derek (uk)