How to Change your Car Battery Terminal Connectors

[marcteigh]

Very small centre pin - high resistance, will reduce cranking ability. Also forget additional wires. And remember that unlike other connectors that need a wrench, this connector also, ummm, needs a wrench.

Nice idea, and great for low current demands with a single wire (no aux wires) and where looks are more important than performance.

[Sevalecan]

0:21 -- God forbid you use the right wrench size for that bolt...

[USMC_BABE]

Yess I learned how to replace mine on the 2007 xterra that was giving me fits with the lose battery terminals thank you for this

[sunnslinger]

Do you still sell these connectors? I cannot find them on your website.

[GILLEBRATH]

Looks quite simple, what about aux wires that accompany the main wires, do you just shove those in also ? Thank you

[alanmeyer]

No tools needed
Tightens cable bolt with crescent wrench.

[ahmadelabed]

Hi, where I can buy this product in Canada

[jamesproudlove]

Hi Wen Product, can you get this product in New Zealand? I'm impressed with the ease of connection.

[troyb]

The WEN product looks nice but what I don't like with advertising is when things are shown that are not correct or pushing a bit too far . Example in this video, the wires that were exposed only needed electrical tape wrapping and it would only pull away from the connection if it is not screwed tight enough . In this video it is shown as if no matter how tightly screwed the other product is, the wires are still going to be slack .

[portagepete]

I should go down to Wen put in my application of course they would say I'm not qualified then improve it so it actually works then get a patent and show them.

[gregorykusiak]

What’s the largest gauge cable these can handle? 1/0?

[zaeemmokhtar]

Is it available online... I am from Malaysian

[chrisharvey]

Where can I get a set of the battery terminal connectors ?

[ceceliapassarella]

Just going to do that now.I like the design my car is an older Acura.I also like that the copper cable wires are not exposed.now I worry less if it will start due to faulty cable connection or the loss of amps to the starter.Thanks Wen engineers.So easy I could do it.:)

[zephryus]

Is there anything like this, but like an adapter for slightly extending the terminal cable??

[fomocowboy]

"Other brands of terminals require tools to install, instead, try our terminals which also require tools to

[joedevaty]

i can't find this product. link?

[craigpalmer]

My car has 2 wires for the positive do they something for that

[styldsteel]

I noticed the publisher has not answered one question on these boards. That is a turn off for me and with that type of customer service and reason enough for me not to make any purchases here.

[codered]

Where can i get this im in winnipeg mb canada