Small Chainsaw Milling. How well does it work?

#shorts
50cc Husqvarna milling lumber with a ripping chain and a 24" Alaskan Mill.

[johnbeck]

Ah, the sweet sound of a Husqvarna saw! Good job!

[danmadefurniture]

Good little set up, iv got a 445, such a ripper little saw

[gorillagoldhunters]

Pretty impressive! Amazing a lil saw can do that!!

[bradwalsh]

we use them here in northern Alaska because I can go in the plane (doesn't take a lot of room)... compared to flying lumber out, it's way way cheaper.

[crashbash]

Getting stuff together now to do this myself.. keep hearing a stihl 029 (56cc) won't work to well but idc it's what I have and its very reliable. I think when making smaller boards 2x4 or 2x6's these smaller saws will work just fine.. a few sharp chains and some patience ... thks for the video

[DTWMTX]

That's an Alaskan Sawmill. Works great but requires lots of elbow grease

[madeirafonseca]

Does running a chainsaw on its side for a long time cause internal oiling issues?

[TheSassygrasshopper]

Chain saw mill is definitely on my radar, how do you like it? Do you use it a lot?

[Just_Chuck_It]

So, I am wondering why you are using a 2x6 on the flat face you have already milled? You should be able to run the mill across that flat cut without the

[josephpostma]

Is that pine? Does your chain get gummed up with freshly cut pine logs?

[unbearifiedbear]

I'm sure you're perfectly safe/protected from kickback in some way; but this was horrendous to watch 😂❤

[edmontoncarrier]

It's great idea. Did you built that stand yourself or you bought it from some where? What is it called?

[patrickmoore]

I have a set up like that using a Husky 61 but cannot get it ti cut further than 3 ft. It seems to cut off line and jam the cut piece against the mill guide as tge cut piece gets thicker. New chain. What is wrong?

[tjdillon]

Question sir
Do you need a special chain?

[alejandrocabrera]

Hi is this adjustable to a 16 inch bar...?

[ieazy]

Just a little tip bro seems like you're chain is a little dull. Could be pushing to hard or I could be wrong.

[u.sonomabeach]

I thought that was Jamie Lannister at first with the chainsaw

[leonardradley]

My grandpa had a bunch of corded electric chainsaws for bucking up firewood. This was 1980s.

Anyway why don't chainsaws mill people use corded electric?.

Do corded electric even exist anymore?.

[davidcarpenter]

That little saw won't last long doing that. Trust me I've learned the hard way.