Diy power trim/tilt Hangkai 18HP #hangkai #diypowertrim

preview_player
Показать описание
I built my own power trim/tilt jack plate. The jack plate is constructed of 4"x4"x 1/4" aluminum angle and 1/4" aluminum plate. I purchased the actuator and switch from Amazon. Links below.

Decided to get back into fishing again. I picked up an inexpensive Aluminum boat and a Hangkai 18 HP 2 stroke off Amazon for cheap . let the adventures start.

DISCLAIMER - I am not paid or endorsed by anyone mentioned in the video. I do believe in spreading the word on good products and dealers to help the consumer. I do not claim to be a mechanic. If you decide to do any mods that I have done it will be at your own risk and I will not be held liable. Also all content is my opinions only and not considered as advice, please do your own research.
The reuse of this video without written permission of the owner is not allowed.

#JerryHawk250
Рекомендации по теме
Комментарии
Автор

Do you think if I be able to similar but just bigger and work for a 90 horse?

BennyMcClellan
Автор

Excellent. I ended up buying a Lund deep v hull with a 25 HP Johnson. But I did see on another website that hangkai had a 25 HP available.

larryalexander
welcome to shbcf.ru