Repair Ink Absorber Pad Full - Brother Mfc Printer 4620dw 4510dw 4410dw Error 46 how to no parts $0.

[sunrunnernge]

Wonderful!! Worked a treat. I was a little skeptical, but gave it a go and it's worked great. !!! Top quality video!

Update - two months following the repair, still working amazing. It's very satisfying and overall saved on the expense of a new printer!

[kaerlighurtado]

I've never really fixed anything like this before but I followed the steps and wah lah! my printer is fixed! Thank you for the step by step instructions. I also wrestled getting my prop arm back in but figured it out and my nails are all black but I am so happy to keep using this printer but more happy that I was able to do it myself.

[fernm]

You just saved another printer from going to the recycle bin! Thank you for your video. You can add the MFC-J4410DW to your list. That's what I have, and your instructions were all applicable. (On the MFC-J4410DW I had to enter the codes using the printer's numerical keypad.)

[fregeau]

Brother claims the printer is garbage when the inkpad is full...THANKS A LOT for this video, it saved my printer !!!

[andrewrowe]

Cheers Terry. Sorted this ink reservoir problem on a 4610 here in the UK, so a bit far to bring to you to sort. Hope the weather has improved your end and thanks muchly for a great video.

[marty]

Thank you. I have the 4320 and there's only 2 cables to unplug and no ground wire. I just replaced the ink absorber, zeroed out the purge counter and all is good. Thank you

[MrSailbadthesinner]

You just saved my 9 year old printer. Many thanks. (I'm sure the ink will come off my hands in a few days! )

[DJS-dydu]

OMG thank you, thank you, thank you!!!
I managed to repair our Brother DCP-J4120DW using your video. There were a couple of differences with cord color and clips vs screws, but with your detailed instructions I managed to work it all out appropriately.
Printer up and running again here in wet New Zealand.


Will send you a gift to your pay pal link.

[possumbarnes]

Well, this was an almost perfect video. The only thing wrong with it was you didn't explain how to remove that stupid scanner carriage prop arm if it isn't already broken! 🙂 Sadly (and kind of embarrassingly) it took me almost as long to figure out how to take that arm off so I could remove the carriage as it did for me to complete the rest of the job! 😞
For those like me, the top end of that prop arm rides inside a plastic guide. That plastic guide seats in the carriage at the front of the printer and clips into place in the rear. Just open the carriage until the arm stops it and unclip the rear end of the guide and pull straight down. It will come right out.

[kerrieanddavidharding]

Brilliant, and appreciate that this repair didn't cost a single cent (well maybe for the piece of packing tape) Thanks for taking the time for such as extensive instructional guide!

[tpbee]

Flipping legend, thank you so much for the level of detail here, everything I needed to fix it without breaking it. Thanks again.

[MF-sydc]

Thank you so much for this.Just fixed it all by myself-so proud of it!

[dipling.pitzler]

Perfect! Thank you very much and greetings from Germany..Goodday 😊PS: I recommend wearing disposable latex gloves while cleaning the sponges

[jayeachtenberg]

Fantastic Video. Thank you so much for taking the time to help so many people!

[vuwfgiy]

Just completed the task as excellently described in the video, seems to have solved the problem, time will tell. Thankyou Terry.

[kkatito]

Superb informative step by step video down to the reseting, even for the not so tech savvy people on the most basic Neanderthal level like me.

[irynasalym]

Дякуємо за відео. Воно було корисним для нас!

[jhansen]

Great vid, thanks - works on MFC-J4510DW. Only thing for me was I didn't get the foam pads dry enough as I ran out of time, and got a warning that the ink absorber pad almost full straight away. Hopefully it'll dry out over the next few days.

[billz]

Wish you were here - USA .
Went to 3 "authorized dealers", one independent for this issue.
ALL quoted a price near a new replacement model !!!!

[johntempest]

Thank you Terry, worked perfectly on my MFC-J4610DW