How to easily resurface a concrete floor | Watco

Create a smooth and long-lasting surface with Watco Flowtop. This tough pourable resurfacer restores rough or damaged concrete to a heavy duty surface suitable for heavy traffic.

Features:
• Fibre reinforced to give a stronger, more durable surface
• High strength at only 3mm thick
• Self smoothing
• Does not need to be painted or sealed. (If a more easily wiped clean finish is required, any Watco epoxy resin coating is suitable such as Epoxy Gloss Coat)

[vegisdelicious]

It's satisfying when the slick floor is formed

[adirondackmedia]

Waited throughout the video to see the finished floor.

[pamelahernandez]

Let’s say you have to replace it how would you do that

[demonicon]

Will this work if the floor is painted?

[hughseagraves]

Would have been great to see the finished product. Question: Would this work for a residential floor? What does it feel like when walked on in bare feet?

[granthill]

My garage floor has several oil stains on it. Would they need to be cleared off before applying?

[The_Joker_]

So to recap,
primer one has to be put on before primer two but primer one too has to be put on over primer two too, primer one too and two too have to be applied separately as primer two too and one too can become primer three too.
Got that?
Good

[johnrobinson]

Don't be misled into thinking this is an easy process to apply because it isn't. It is also very expensive to do an area as large as a double garage floor for instance.

[cranstjs]

1. If you do the floor in sections, and you do primer one and two, and then the mixed compound, and you have 20 minutes for it to set, and then you start with another section, and it takes like 10 minutes or more to do the primer part and then more time to do the next mixed compound, when you come to an edge where two areas meet, and you use the spiked tool, I assume you better stop short of the first area or you will ruin it with marks. And how do you make sure it becomes one smooth surface if the first area is already set and a wet area meets it. Won't that create a seam look?

2. If you are doing a room with 4 walls and a door, I guess you have to make sure you work your way from the farthest corner first and back toward the door right?

[DB]

Can you work a new section if the previous section has completely cured? I'd like to do my basement in segments of time, not just space. It would be a huge hassle to clear everything out of the basement and do it all in a single day. I'd rather move everything to one side, do half the floor and allow it to completely set, then move everything again and finish the remaining half. Will the two sections bond properly if one has already set? Would there be a visible demarcation?

[ZXCharlieR]

4 non blondes as the background music .. "What's going on?" ... Lol

[ethanhunt]

waited throughout the video to see the finished floor. 😡

[barristanselmy]

I'm going to fix my local skate park, the concrete is highly offensive. Would this be suitable>?

[IrvingRLucas]

Can i use in a fish processing area? Can it withstand a forklift traffic..

[failbettr]

Can this be added over an area where old linoleum has been pulled up and stubborn patches of glued paper backing remain? Will it simply level everything out?

How long is the trying time between coats

[philindeblanc]

Will this look like concrete, with natural trowel differentiation, or will it look like a uniform paint or epoxy?

[DitNg]

If the result is good, it will show the finished product.

[shijomaratt]

Hi, I am looking for similar concrete finish for a shop interior. How do i get the materials in abudhabi?

[AndrewsMotorWorks]

Why is this man not using a dust mask? ...and they call me dangerous.