How to set timing on Chevrolet / GMC 350 / 5.7L V8 TBI Simple step by step.

Показать описание

Dylan's Auto and Machine Repair

Рекомендации по теме

Комментарии

That timing light is older than dirt. Lol! I remember having a timing light like that about 50 years ago, I have the newer version that has a slide like clip that goes around the #1 sparkplug wire, I've been retired from auto-mechanic since 2007, they may have a newer version of timing light than what I have now, but they all serve the same purpose. These TBI engines are actually pretty easy to tune or do maintenance on, I personally think these TBI GM engines are the worst engines that GM ever came out with, the Vortex engines are much better, but the LS engines that GM built are far better.

alanwylie

Why would the fuel pump not run with advance wire disconnected and run with it connected. Another thing is what if one were to time one of these TBIs without unplugging the advance keeping in mind that the advance is about 20 degrees advanced when connected. So setting it to 0 and adding about 10 degrees by turning the distributor so total timing would be 30 degrees or so. How much total timing do these things like. The average for a sbc is around 32 to 34 degrees of total time at around 3200 3500 rpm but I ve read that these TBIs don't necessarily need that much total time due to the the fast burn swirl port heads. Any thoughts?

Brock-otwi

Love the zip tie holding the radiator hose down.. 😆😆

ryneprewett

Hey man. That stuff on your passenger side firewall I don’t have. I can’t find the advance plug can you help me?

nolimitfano

How can tell which plug is the timing advance wire? My 94 k1500 has 4 or 5 of those and they all look the same.

ctford

In my 87 van you can do it all from the drivers seat

devonmcclanahan

How do I do the timing on my truck with it not running

noahstevens

This method is theoretically good and correct, but practically in an engine like this after 30 years and more the markings on the poly are no longer accurate, therefore aiming at 0 degrees with the wire disconnected will not cause the engine to be correctly oriented.

naelhalabi

I cannot find the wire you disconnected

rogerherrera

How to set timing on Chevrolet / GMC 350 / 5.7L V8 TBI Simple step by step.

How To Set Timing Ignition Timing With A Distributor

How To Set The Timing On A Toyota 1AZ FE/2AZ FE Engine

Setting Ignition Timing Video - Advance Auto Parts

Base Engine Timing Explained

How to set timing on a 4 stroke

Toyota gli 1nz engine timing mark | Toyota gli 16valve efi engine timing setting

How to adjust timing - 350 Chevy small-block | Hagerty DIY

GOLF MK1: TIMING MARKS, AND SETTING TIMING #golfmk1 #vwgolf #vwcaddy #golfmk2 #vwfox

K.S.A.Isuzu engine timing set opening 🇸🇦🇧🇩❤️

Setting the Ignition Timing On Your Honda CB500K / CB550 / CB750 / CB350F / CB400F

Ignition Timing For Power

How to Set Timing in 2.1L VW Vanagon

How to Set Up a Toyota 2GR-FKS Timing Chain 2GRFKS

How To Set The Timing Correctly - Barina ¦ Cruze ¦ Astra ¦ Corsa 1.6 & 1.8 Engines

How to adjust sewing machine hook timing

How To Set Ignition Timing on a 2 Stroke Dirt Bike

The CORRECT way to Set Timing on Ford Engines with a Distributor

How Ignition Timing Works: Vacuum and Mechanical Advance Explained!

Timing Your VW Engine - Static Timing Method

How to set timing on a 1.8 and 2.0 Hyundai Nu engine

How to set the timing in a 289

How To Set Your Fox Body Mustang 5.0L Timing (1986-93)

setting ignition timing on a Chevy TBI 87-93

How to Set the Timing and Install Timing Belt 2.2L Toyota Camry ’97-‘01