How to test the air pressure switch on the Baxi 105 range of boilers | Baxi #TrainingTuesday

preview_player
Показать описание
Baxi trainer Lance takes you through how to test the air pressure switch on the Baxi 105 range of boilers.

Please note: This video is intended for Gas Safe registered engineers only and is subject to our full video disclaimer which can be found here:

#boilertraining #TrainingTuesday #combiboiler

#Baxi #centralheating #boilerinstaller #baxiworks #Boiler #Baxi105 #GasSafe #AirPressureSwitch
#hvacr #hvactraining101 #hvactraining #hvactrainingvideos
Рекомендации по теме
Комментарии
Автор

The trainer on this video is a top class, my trainer in British gas was a low class mappet 🤣🤣

SAS-gukl
Автор

What should the volts reading be on the multimeter?

colbaco
Автор

That's was very well explained! Understand how to test fan now.
Maybe pumps, diverted valves, gas valve next? :)

abdulh
Автор

Hi im working on a baxi 105 he and its showing an air pressure problem. The fan is running with 240v at it and 34 ohms across it, the boiler lights when i manually make the air pressure switch by sucking on the tube. Ive also changed the aps with no joy. The fan seems to me to be running a little bit slow even tho its spinning freely and isnt stuck at all and has the correct voltage to it, Any ideas?

Eva_lily
Автор

Had a problem where, fan runs fir few seconds then stops . And continued to do so without ignition happening. It sparks but no ignition. When I took hose off the spigot fan runs properly but still no ignition, any ideas would be appreciated.

darrenkelly
Автор

Great video, can you please let me what is call the one what you recommend to use it to check APS not to blow .from where can I buy it
Thank you

sheriefgerges
Автор

which hose goes to which outlet on the new valves? suggestions for securing the new valves since there is no mounting bracket like on the one it is replacing?

crosswaychurch
Автор

1:22 me watching this after I tested the pressure switch with a multimeter and blowing air into that presure pipe 🤡
I put light pressure thou, and I could hear the air going out on the other orifice of the switch. All good for now 😅

adrianTNT
Автор

Can anyone help please me with my baxi boiler. The fault on fan or fault is flashing

paularobinson
Автор

So did he say with the fan running the switch goes from normally closed to normally open? ??

alanbroderick
Автор

hello uncle, great video, thank uncle, 🤣🤣🤣

full
Автор

The boiler looks surprised almost embarrassed that its fronts been removed 😳

russelldouglas
Автор

Anyone had a fan running slow on these and not making the aps?

Eva_lily
visit shbcf.ru