My DN4816-O Setup with my Behringer XR18 - Midas' Comeback

This is a quick Overview of how I set up for FOH, and use the DN 4816-O for In Ear Monitor Rigs for Bands! I believe this is a Midas Comeback for making this product, and if used right can be used for all Gigs! Currently only good for the X/M Air 12,16,18 Series. X/M32 compact, Full size Consoles. S/DL 16, 32 Stage Boxes. Behringer Wing, Stage Connection. As of this Video, this is my demonstration of my XR 18.

~All links above are Amazon affiliate links, I get commission for each link, no extra cost added~

DN 4816-O in video:

Behringer XR 18 in video:

Power conditioner:

10 x 16-O Snake:

My Website:
My Socials:
Insta
Tiktok
Twitter
Facebook

~Where There Is No Right Or Wrong
Music Matters~

[cooljackss]

Nice set up. Whatis the size of that gator rack case. 4u or 2u??

[jasonportnoy]

Where did you get the rack mount spacer? I like the fact you can put the cables right through it.

[zafush]

Thanks @seantallica2020, great content and coverage of the Ultranet connectivity options. I have a question: If I connect the Behringer X Air XR18 via USB to Logic Pro X (LPX) to record a multitrack live show using the guitar input (from one of the Hi-Z inputs) loaded with FX plug-ins in LPX (modeling, reverb, pedalboard, etc.), would the FOH (via the Midas DN4816-O) only receive the direct guitar input, or would it also receive what I hear in my IEM (with the FX plug-ins)?

[jimmyjamz]

Can we see this in action and how it works for you? Because we have P16’s for the musicians and im curious how this would work practicality wise for us…

[dougtaylor]

really nice setup - only downfall i see is not being able do live recordings multi track from usb

[AndyGeroldMusic]

Do you have any idea why when I mute channels on the xr18 it also mutes them on the DN4816? I already set the outputs to "input" instead of "input+mute"

[joaob.]

Hey! João from Brazil here! It's a little hard for me understand the use of the DN 4816-O and DN 4816-I connected at the XR18. we have a XR18, and we are looking for ways to have more in/out channels because they got not enough for us. Can you explain if the DN 4816-O and DN 4816-I can add more in/out channels to the XR18, or is just a solution to don't use the plugs on the XR18? would the s32 a solution to us? it works? thank you so much!

[AutoCarShow]

Hello budy, how are you ? Do you have the measurements for this case? I'm building one like yours but I can't find this case, thank you!

[Phil-ttem]

can you show an example sending the signal of the midas unit to your in monitor system and how you control the volume for it?

[raijuventus]

Can we perharps just use long cat5 cable (30 meters length in example) and then put the DN4816 beside the FOH mixers instead of put the DN4816 in the same rack with XR? I mean to make xlr requirement shorter for connectiing the analog out to the FOH Mixers.

I hope u understand my words. Pardon for my bad english.

[skyblazer]

We want this for a similar but slightly different purpose, to connect the DN4816-O outputs to the front of house while using the XR-18s aux outputs for our IEMs. This should also be possible, right?

[moddaudio]

All the channels on my XR18 started loosing high frequencies as the caps dried out.

[Geiel]

Very clean setup! What rack are you using?

[TheMrCull]

Hey, curious if the outputs on the Midas unit sound any better (cleaner?) than the behringer? I’m familiar with the behringer’s outputs, just wondering if the Midas, (conversion) is any better. Thanks!

[daltonclements]

you can come out this, and go to FOH, correct? Using the XR18 aux for IEMs, and the DN4816-O to send out, to the FOH.

[danielgomez]

Hi bro !
Thanks for your amazing videos.

I have a question. Do you know if I can use the midas DN4888 to add inputs and outputs to my XR18?
Can I use ultranet - output 1 ( stage connect ) in the DN4888 for sending and receiving sound?
Thanks in advance!

[DavidMacVicar]

I don't understand how this Midas DN4816-O removes the need for a splitter. I know it connects via Ethernet, but... each band member would just plug into the front of the XR18 and then the Midas DN4816-O does what....

[neutrinou]

However DN4816-O cost more than 2x Behringer MS8000 passive XLR splitter. And passive splitter will work even in the console is off. Is there any advantage to use this instead of a passive XLR splitter?

[oscardeoliveira]

Onde vende esse modelo de case? Entrei em contato com a som case e eles não tem.

[sambitkundu]

Can you share a practical use with this setup in a live environment