Infiniti G35 G37 Steering wheel Trim Repair

Amazon Links

Water-repellent paint for metal surfaces in kitchens and bathrooms. Washes easily, resists abrasion, moisture and scratching. Self-leveling formula creates a smooth factory-like finish.

Rust-Oleum Specialty Appliance Epoxy is an ultra-hard, moisture resistance enamel that is specifically formulated for indoor metal surfaces. It provides a smooth, washable surface for refinishing the exterior of appliances such as refrigerators, dishwashers, laundry machines, and other indoor metal applications (cabinets, tables). Do not use on objects exposed to heat (stovetops, oven interiors, etc)

As an Amazon Associate I earn from qualifying purchases

[kyngjay]

I never understood how someone could thumbs down a video of someone taking their time to show you a possible way to achieve your goal, smh. I personally found the video helpful and I greatly appreciate you taking your time to demonstrate your process. I’m excited to start my DIY.

[ralphcoton]

I used ordinary household isopropyl alcohol and a rag, removed every bit of it without any issues. Came out like right from the factory. Thank you for the video, very helpful!

[cneedelman]

It's a little harder than it's made out to be in the video, but without this video I wouldn't have tried this, so THANKS! To loosen the 2 Torx which are in with Locktite, I used Channel Locks to turn the nut driver holding the Torx bit. The little clips that hold the air bag connectors need to be pried off with a small pic or screw driver, takes some fiddling.You'll need a breaker bar to loosen the nut on the steeing wheel. To finally get the cowling off the back of the steering wheel, it's easier if you take off the metal ring so that you can get to the tabs.

[billberson]

GREAT tutorial. My son and I followed it step by step to do our wheel trim. Really appreciate that you showed reverse order too.

[pauldavis]

Nice job! Detailed directions, thanks for including how to scuff the old paint off before repainting. I’m doing this to my EX35 this weekend! 👍🏻

[mtesh]

Man, that turned out great! I've been staring at my horrible looking G37s steering wheel for years. Definitely doing this on my next weekend off! Thank for sharing! How has the paint held up?

[peterkim]

Thanks a lot for the upload. I'm sure it helps to many infiniti owners. Thanks again

[Deemah.cr]

Idk why but this was the most simple and easiest video I’ve seen on this project.

[bobwhite]

Great video. How do I just remove or change the left hand side source button ?

[ubiased]

Excellent video with very detailed information. You give us confidence to the Infiniti owners of how to fix this common paint peel problem on the steering wheel.

Keep up the good work man.

Fyi, I own 2009 Infiniti g37s coupe.

[DacAL_]

I have a 2008 EX35 crossover and it looks 100% the same steering wheel I have. That’s awesome! Thank you!

[angellopez]

for those that dont like that glossy black, if you scuff the gray, there is the satin black plastic under that, perfectly matches the original look. so, scuff the top damaged black, then scuff the ugly gray, finally at the black level which will not be scratchable again.

[iTzTamm]

is that how they do steering wheel alignments?? 3:05

[marcstov]

Great...now something else i didn’t know I wanted! Great vid

[juliogracia]

Very well made video. You made it look really easy. Thanks!

[scottr]

how do you pop off the middle part on the shiffter knob to paint it.

[DiversityKingGaming]

Hydro dipping it would turn out dope I bet!

[nightmindr]

i was worried this wheel would be hard to take off. I'm very excited to see how easy it is. Thank you!

[ferretkiller]

Great video! Thanks for taking the time to make the how to.

[adanarceo]

Did you get any warning light after this procedure?, cause I saw the steering angle sensor moving while you were doing this.
Thanks for sharing bro.👍🏻