Am I breaking any rules?

preview_player
Показать описание
Is it ok to use Edelbrock air cleaners on carburetors that are NOT Edelbrock?
Рекомендации по теме
Комментарии
Автор

It's your ride your money Sir, it's personal preference.

bobbytaylor
Автор

As long as that rod for the air cleaner doesn't go through the hood.

NathansMoparGarage
Автор

The stock Chevy performance open element air filter is better due to its bottom plate is shape to act as a venturie.And sits lower offering better clearance with the hood. This from how to Hot Rod Small Block Chevy. The bottom plate was dynoed by itself on open carb and actually added 3 hp all by itself.

fireballsoutherner
Автор

Don't matter. Make noise. Have fun

daviddntait
Автор

You need one that gives a Venturi effect which is helped by the downdraft flat plate with a downdraft makes it like a velocity stack just take a stock Edelbrock low profile laying on the ground and run a bunch of water across it and see what happens it'll go up one side and jump over the carburetor home down the other side should make sense to anybody

fullcirclerepair
Автор

The Edelbrock brand carburetor is actually a Carter AFB
RACER RICK

rickweber
Автор

When I installed an open element air cleaner, the filter plugged up every 6 months. Into the trash it went.

Didn't matter the name. I could go a year or more on an OEM filter with a standard housing assembly.

karrpilot
Автор

I like unmarked Chrome air cleaners also downdraft not low profile if you use a low profile especially on a performance car and a Holley the air goes down first then it goes up around the carburetor hits the top of the air cleaner and goes back in this creates a flat spot and they make low profile air cleaners they suck your car will perform much better with a downdraft one that is flat on the bottom and sweeps into the carburetor proven fact in Edelbrock doesn't pay anybody to advertise for them

fullcirclerepair
Автор

Someone will always complain about anything anyway. Your ride your rules

neverbored_s_addict
Автор

Not a carb guy, but I think in general the thing it says on the tin is what it should be (unless the thing in the tin is better than what it says

Birb_of_Judge
Автор

i mean my daily has an edelbrock air cleaner with a 600 holley under it, and believe it or not i really don’t think the engine cares

peepbeepmemecreep
Автор

If it works and stays together wth does it matter. When it comes to filters or intakes. I mixed matched all kinds of stuff except for internals on my first build when I 14. Even then I had a little bit of guidance from a friend but he taught me to mess things even set distributors or carbs off so I would learn.

willkincaid
Автор

As a mechanic the main point is you have an air cleaner and filter period

ericschuhmann
Автор

If it was in a car show, you’d probably want everything to match.

orangesun
Автор

It's your motor and all you put what ever you like friend

rodneyburleson
Автор

Elderblock intake holly carb elderbkock ar cleaner

markbates
Автор

Just depends on what flavor air you want

johnhennery
Автор

It don't matter as long as you're using an air cleaner who cares what anybody else thinks

ericanderson
Автор

There are no rules it's called freedom do what you want😂😂😂😂

davidchapman
Автор

Elderblock makes intake manifolds as well so np

lescobrandon