Monocouche Render From Base Coat To Finish

Показать описание

Partnership Construction

Рекомендации по теме

Комментарии

Please get this sorted ASAP the mesh has to be bedded in not coat on top of it esp a heavy render will be lucky to last a month

rosco

No scratch coat

And mesh should go in the 1st coat not under it

waynecox

Did you let the first coat go hard or just straight over it

rockroll

Tape and window protection must be expensive in the uk, but not as expensive as a new door or window, wrap in before u tap
It lads

Ireland-bcgx

So many wrongs here its unbelievable. Do not copy this procedure!

roryprice

😂 how have they just left this video up after two years probably out last that shocking job back to basics lads

huwprocter

At least cover the door for the video lads😮😮

kieranhorkan

Why make a video of something done so wrong?

thegolfguyyano

wow never seen it done like this! and iv been doing this for many years, i understand everyone has there own way but this deffo goin to fail within a year because how youd applyed it,

immense

🫣You guys layed the mesh straight ontop of the brick, went straight over with the base 😂

No stress points addressed, no glass protection, bunch of 🤠🤠

epmonster

Not got a clue as the mesh should be bedded in not troweled over, this customer is being shafted

TonyCarrigan-ql

Your not susspossed to use the mesh that way if the rep caught you he would fail the system, your susspossed to put the mix on the wall and bed the mesh into it, Mickey mouse way your doing it there

yamontoawinnerslotschannel

🤣🤣 what are you doing mesh should be off the brickwork not layed on it and not even covered up the doors or anything 🤣 chancers

jackliney

State of it lol, ffs put some glass protection on

paulhelmn

No scratch
No mesh
Mesh behind coats
Speeds lol to straight (flexible edge)
No tape or covering for doors and windows fuck me amazingly bad
Just cos the finish is ok or even good it will not last a couple of years in weather changes

scosy

Guys 😂 you bed the mesh into the base, not pin it to the wall first 😂 worst practice Iv seen in a while that

shaunpascoe

Monocouche Render From Base Coat To Finish

Monocouche Render From Base Coat To Finish

Mesh Base Coat Monocouche Render Tutorial.

Wenber One-coat Render for Beginners

SILICONE RENDER | Is This The Best Rendering System?? (FULL PROCESS EXPLAINED)

How To Monocouche Render A Wall - Rendering Tutorial - Monocouche Render Scratch Stone Finish

Part 3 - DIY Weber Monocouche Render #diy #render #homerenovation #diyproject

The K Rend Kid #plastering #rendering #monocouche

Ecorend MR1 Monocouche Render System Application Guide

How to Apply K Rend Primer TC. Tricks and tips! Silicone Render!

THE BEST RENDER FOR BEGINNERS EVER!

Scraped Render Tip

Monocouche Rendering - Application and Scratch #plastering

Rendering Walls Made Easy With This Bagged Render ('I Should’ve USED THIS YEARS AGO!!!')

Floating up K Rend Hp12 basecoat Render

How monocouche should look before the H BAR from @precision_rendering_ 💪

Applying the render scratch coat #rendering #renovation #ukrenovation

K4 spraying ki7 fassa basecoat! Wall rendering, machine rendering

PRB Special Base Coat and Monocouche Top Coat onto Existing Painted Render and Red Brick Substrate

Monocouche External Rendering using the Ritmo L Plus spray machine! #rendering #externalrendering

Silicone Render Shown In 60 Seconds…FULL VIDEO SATURDAY

How to finish basecoat render. Power float finish prior to silicone

RENDERING: Sand Cement Render's DEAD | This Bagged Render's 10X Better Than Sand Cement Co...

#Monocouche #Render #Renovation

K-Rend Problems | K-Rend series pt.1