Reefs RC RAW500 SERVO!!!

This servo is AWESOME!!!!! Specs and links to get yours are below

Other servos Reefs RC has to offer

Reefs RAW500
High Torque High Speed Brushless Servo
Submarine Waterproof: 6 Point Seals
Voltage 4.8-8.4
Internal Steel Gears
All CNC Aluminum Casing
Anodized Color: RAW
Dimensions 1.57 x .79 x 1.5 ( LWH )
Torque 450oz @6v / 500oz @7.4v / 565oz @8.4v
Speed .11sec @6v / .095sec @7.4v / .08sec @8.4v
Spline 25t
Deadband Width 2ms
BEC Not Required but it is recommended

[traildevil]

Lets see it in the servo tester! Also, i'd love to see the new JX 70Kg in the tester. :)

[Houleigan]

Cool! Well good thing I need a servo for another project. So if I get one of these I will put in my Gen 8.

[tomlucasrccrawlers]

You get what you pay for.
I have several 555's and Protek 370TBL 650oz servos and they are extremely powerful. I also have two 46kg Japanese servo's that were $50 each. They aren't bad for the cost but not near as powerful as the Reefs and Protek.

[jhawk]

Like the vid before i even watched it !! You really makin me want a Capra. I got the 555 on order for my traxxas maxx

[squier]

Very nice! Seems like some new servos have come out since your servo comparison back in 2018. Maybe it's time to bring the servo tester back out!

[tomlucasrccrawlers]

2-speeds are sweet for that extra low crawl and for those occasional dirt hill climbs where you need that tire speed. I'm debating on getting rid of my 2-speed in "King Midas 6x6" in favor of a Vanguish tranny and Dig. King Midas 6x6 being a "Truck Trials" style of rig and I've seen them with "digs"....I just think it'd be cool....but oh!...I love my 2-speed.

[redline]

Put two of those on and you would turn the crab walk into the crab hop!

[michaelburton]

I like your channel. I think you should consider wearing your camera on your head when your wheeling outside (slightly zoomed)... it would be nice to see you driving how a normal crawler would occasionally... I get that this may not work on everything you shoot, ..but try it.

[Plate]

Awesome!! Love your videos, super helpful, more so than most rc stores lol. Noticed you dont really use treal aluminum servo mounts. Do they not fit the Reefs good or something?

[ericschmidt]

Exo, it looks like you pulled the brass? How come? I have a pair on the way along with one third member in brass. If I like it, I’ll buy another set for the rear.

[fernsolo]

Nice review man, pretty impressive servo 👍

[hemitj]

How do you think this servo would hold up to a RR10 BOMBER? I can't seem to keep a servo in it. If not what servo do you think?

[stevendouglas]

A little off topic but I know you run a hacked flysky radio...as do I. How are you powering your servos? Do you bypass the rx to be able to run 7+ volts to your servos. I am trying to run 7+ volts through the flysky rx and i think this might be the reason my servo wont always recenter and is glitchy. Same issue on both of my trx4s using 25kg servo. 1 with a mamba x and 1 with a 1080 esc both with the bec turned up on the esc setting

[briankenny]

Just got mine w the reefs servo winch paired up w it

[rjrcnunn]

Is the reefs raw 500 a 180° or 120° servo??? Thanks

[douglaselliott]

You're never too old to learn. WTF is a BEC? I've heard them mentioned before in servo discussions and when I questioned my hobby shop about the Traxxas 2255 400oz servo he had no better idea of what it does and how it does it than I. What is it; a capacitor of some sort? Another question! I got a Traxxas High Torque 330 on my TRX4 and LOVE it. However, it has a far greater amount of 'slop' at neutral position than does the traditional 'Core' servo on two other RCs I have. Is this 'slop' normal for the 'Coreless' variety of servos? Traxxas support said "Nothing to be concerned about if it's not hampering driving"; but I'm curious still.

[Ferra]

Need to put it on the servo tester!!! I can't choose between this raw 500, triple 5 or the 3 brothers g13. What's you recommendation between these 3 servos? Which would be the most durable?

[Pedro-sv]

Haw many kg. Is?

Good video & good review? 👍

[RevolutionX]

It's nice to them using steel gears instead of titanium coated aluminum gears.

[locosammy]

Do I need to program it or can I run as is