POULAN - Wild Thang ChainSaw ~ MOST COMMON PROBLEMS ~ Worst Saw on the PLANET (Any Box Store Poulan)

POULAN - Wild Thang (Any Box Store Poulan) Worst Saw on the PLANET
These are the Most Common Problems

I've done enough of these machines now to say, these really are the worst saws.
That said, in this video I show the MOST Common Issues and How to Fix these.

Check out my Other Video on a similar machine!
Poulan (P3416)-(P3314) Chainsaw Repair & Service ~ Carb Rebuild, Hoses Replaced & Ignition How To

[videocardzrule]

We have a small commercial tree removal company, we’ve been in business since 2002, we have a group of 8 guys, we also have a fleet of (10) Poulan Wild Things. These saws see 8-12 hours per day of use, and have been up and running since 2002, so after 22 years of hard use, I can say we only had 1 of them go down on us. We regularly keep packs of zip ties so we can reinstall the bolts tight after maintenance.


😂😂😂😂

[Rein_Ciarfella]

I have several of these, acquired free or very low money about a year ago soon after I started teaching myself small engine work. These Poulans and Craftsmans are all rebranded Husqvarna low end homeowner grade saws. Because they were so inexpensive I think a lot of owners treated them badly - not cleaning them properly, not knowing the basics of chainsaw use and maintenance. Because of these factors most people considered them almost throwaway saws and treated them as such. Almost all the ones I’ve seen are filthy and show real signs of neglect. The good news is there are so many out there for free it’s easy to have dedicated parts machines. Also, they’re very easy to work on and learn on. Parts are readily available, especially fuel system rebuild kits. They can also be modified easily to improve performance by adding air intake ports, extra muffler exhaust holes and even cutting out some small areas of the case to improve airflow. They are also cheap learning tools for porting if you’re really into speed/torgue improvements. There are MANY Wild Thing and others of this 42cc basic family YouTube videos about these, so learning about them is very easy if you want to put in the time and effort. Since starting on these I’ve worked on higher grade saws and seen the differences in build quality, but as beginner/novice saws I think they’re fine. Always use the correct fuel mix, keep the saw clean and the chain sharp, store them correctly and you’ll get years of decent service from them.

[joeseda]

I have a 2004 model 2375 since 2004 and have NEVER had any type of problem with it. BUT, i perform maintenance on it every 3 months whether its been used or not. I love the little saw and it has always done what needs to be done. Just take care of it and it will take care of you when needed. BTW, parts are starting to dwindle, so be VERY careful with the plastic parts and assemblies like the choke lever and the air filter housing.

[dazedconfusedSKZ]

I’ve got 2 Poulan saws I gotta work on today, good tip with the bread tie/ zip tie and your vid will help thanx Arch!

[Fueler]

Yeah I’ve worked on a lot of these poulans too. I know some mechanics will use the impact drill on these that well strip out those plastic holes. I always use my hand. I’ve also seen some of these saws will have no gasket sealant in the clamshell. Air leaks. Love the video and keep up the good work

[ChrisR]

I had a customer wheel a poulan into the shop just a few days ago. I told him I wasn't able to help as I only work on STIHL and sent him on his way. Having watched this, I'm glad I didn't even pop the cover off because this saw is just a disappointment in the way it is constructed. Put this saw next to any STIHL saw and you'll see a huge difference in build quality.

[EricFB]

Maybe I got lucky but I love my Poulan P3416. Super light, starts 2nd or 3rd pull every time. I keep the chain sharp and let it chew through at it's own pace. Going strong after 4 years, but I treat it like fine china.

[steventhompson]

Got one of those from a friend who didn’t want it lol. Going to go through it soon. Great tips !

[marioncobaretti]

Tone loc was making hit songs back in those days, one of them was wild thang

[kraftzion]

I have the craftsman strato version so got you beat:) Not only is it strato, it might not even have the chrome lined bore. Don't know on this particular saw but Sears has put out non lined versions of poulans in the past. That being said after modding the muffler, drilling the carb venturi out from 9.5mm to 12mm, shaving down my carb blade screws, opening up the air inlet hole next to the fan, taping the outside of the bar with aluminum tape so the oil actually goes on the bar and not out on the ground, and probably a few other things I forgot about I am happy with its performance 😂. Actually runs pretty good for a $20 saw.

[boneyardgaragesmallenginer]

Nice video👍🏻
I have use the zip ties also and I also put five minute Apoxsee on the screw
Boneyard

[Rein_Ciarfella]

Arch, I’m getting ready to build myself a very heavy, very solid workstand/table to work on all sorts of small engine equipment including lawn tractors, snowblowers and larger generators. I’m going to have the ability to roll it around or retract the casters on at least one end so it’s stable horizontally. I’ll be building it out of scrap 4x4s, 4x6s, 2x4s and plywood top probably 1”. With that construction bolted together with lap joints I probably won’t need diagonals. I now have two pieces of equipment (FreeCycle and local yardsale giveaway) for lifting. An electric 1K winch set up to lift from off a huge laminated beam and a rolling patient lifter capable of at least 450lbs. What would you consider the optimal height and maximum length and width of the table? I plan on leaving plenty of leg and knee room underneath so I can work on some things sitting one on my harbor freight rolling stool but eventually install some tool storage underneath which will reinforce the entire structure. Any suggestions more than welcome! A couple days ago I used both lifting apparatus to mate the two main sections of an MTD 5 HP chipper together and assemble on a temporary rolling table. It felt a lot like an auto shop with a car on a lift using a tranny lift to mate a trans into a car. Worked perfectly!

[BridgestoneRB]

I've had a Craftsman version for about 25 years & it's the best saw I've ever owned (I also have Stihl saws) - it just runs & runs & runs...

[davidavorpflanz]

Great, I bought mine in 2000...just have had the 1st problem with it...the Fuel Primer bulb is cracked, and needs replacing.

I'll have a look at doing some of tgese other things, like the coil mount check, oiling the pull-rope rewinder, maybe get a new sparkplug? 24 years, doing ok for the " worst chain saw on the planet"!

[P.Trim]

yes sir subbed up when seen u say ur putting little piece together on fuel line sizes this video and stuff like that is what i think lot people go to when they fix their stuff or try to fix.

[waynestefinashen]

Had a Wild Thing leaf blower/vac ran great but vibrated the crap out of my hand which always swelled up and felt tingly when i finished. After many years replaced the carb then the next time it did not run bought an electric plug in one, no vibration and runs great.

[wattoffgridrv]

basically the dustbuster of the chainsaw

[kevinbeck]

I've one for years no problem with

[destin-diesel.]

So is it worth the time to put an actual metal threaded piece in the plastic instead of just using the same screw? And if the mechanical side piston and pumpkin are decent design why care if the screws can work loose on a non pro cheapy saw.

[mrcdriver]

I have had a Wild Thing for ten years now, I get it it's not a Stihl. Had the blade sharpened once and it still starts on the 2-3 pull every time even after sitting for 6-8 months. For 99 bucks it was a good buy. When it breaks I will get rid of it.