Installing a Diva Smart Dimmer for the Caséta system in a wired 3-way application

Welcome to our channel! In this video, we provide a comprehensive guide for installing and programming the Diva Smart Dimmer DVRF-6L for Caseta systems. Whether you're a DIY enthusiast or a professional installer, this video will walk you through every step of the process.

*Sections Covered*
• 3-Way Installation with Existing Switch: Discover which wires coming from the wall need to be connected to the DVRF-6L and the existing switch at the second location.

• 3-Way Installation with DVRF-AS Accessory Switch: Determine which wires from the wall must be connected to both the DVRF-6L and the DVRF-AS accessory switch at the second location.

• 4-Way Installation with DVRF-AS Accessory Switch: Learn which wires from the wall need to be connected to the DVRF-AS at the middle 4-way location.

• Product Settings: Discover how to adjust trim settings directly on the DVRF-6L dimmer. Maximize energy savings and optimize performance with these settings.

We offer a comprehensive knowledge article that addresses installation questions with the Wiring Wizard, settings adjustments from the Lutron App _(Smart Hub required)_ and common issues such as lights not turning on, unresponsive Pico remote controls, and flickering bulbs, along with probable causes and recommended actions for troubleshooting:

Whether you're a homeowner looking to upgrade your lighting control or a professional installer seeking guidance, this video has the information you need to successfully install and program the Diva Smart Dimmer DVRF-6L for Caseta systems.

If you found this video helpful, don't forget to like, share, and subscribe for more tutorials and troubleshooting guides. Thanks for watching!

#Lutron #LutronElectronics #LutronCaseta #Caseta #SmartHome #InstallationGuide #Troubleshooting #DivaSmartDimmer #DIY #HomeImprovement #TechTips

[DarylCrow]

Very helpful, would have saved me a lot of time if 3 way installation was included with the Diva smart switch as I spent an hour trying to figure out why the 2nd switch no longer worked. I couldn’t find instructions on the product page either, only instructions for single pole. Would be helpful to add this video to the product page for others (unless I just missed it).

[callibretto]

I am not sure if my led lights are dimmable, but I also really only need them at full brightness. Will this switch work with the lights if I leave the dimmer at full brightness?

[Kelvin.B]

Is it possible to have each outlet with a diva dimmer?

[petersonfamily]

Is the Accessory Switch any physical 3 or 4-way switch, or is it another Smart Switch? What is the Model number of the Accessory Switch? Thanks

[timp]

Hello. I just purchased the Diva Smart Starter kit. I have two 3 way switches that go to a kitchen light. I changed out the first switch with the Diva dimmer wiring exactly as described early in this video. It works perfectly. I went to the second 3-way switch that's the original mechanical non-smart switch and it works without doing any rewiring as shown here with the yellow wire. What does this yellow wire accomplish if my lights work on the second switch without rewiring it? They go off/on just fine.

[adamrotman]

My existing wires are all the same color (black). On the existing switch, how do I identify the wire that I connected to the blue wire on the Diva?

[CameronL]

If you use an existing mechanical switch with the diva will both switches be able to turn the lights on and off? The mechanical switch needs to remain always on for the diva to work?

[mikedeanb]

I successfully wired my existing 3 way switch and a Diva dimmer. But I wonder, is the jumper wire necessary? Could I have left my 3 way switch wired the way it was by the electrician who initially installed it? It had been on a 3-way with a regular dimmer prior to this. If the jumper is necessary, why is it?

[laddcampbell]

If I use my Caseta app to dim the lights, will the slider on the wall plate automatically/physically adjust accordingly?

[jsubound]

Word of advice to anyone calling for tech support, never call after 10pm CST cuz your call will be routed to a foreigner who doesn’t speak English and is rude af

[alexm]

I have 5 switches controlling family room lights. Can I just but one diva and connect it on one of them and control the dimming and on and off with the app if I do the jumper on the other switches?

[rickhelm]

The video was of great help but directions were horrible. I had no clue what to do with the yellow wire for the other switch, until watching video.

[Jarut]

@Lutron Electronics In your Advanced Installation Guide Page 44 says to connect the tagged wire to the Red wire on the Diva. In the video you connect the tagged wire to the black on the Diva. Can you connect the tagged wire to either the black or red?