How to REMOVE wrinkles from your pool liner

Today I going to show you how I removed multiple wrinkles in my pool liner using very simple tools. The tools I used can be picked up from almost any store and include a plunger and water shoes, if you don’t have water shoes you can use soft soled shoes that are clean ! The process takes about ten minute per wrinkle, so I call this how to get wrinkle out of your pool liner in less than ten minutes! I hope this helped you, if it did please subscribe. I’m doing this in a salt water pool but this would work in any pool with a liner, just remember, TAKE your TIME !!!

Subscribe NOW and hit the bell to get notified about new videos

WANT TO WATCH MORE VIDEOS?? Watch our most popular videos:
► How to install a pre-hung door
Watch our most popular playlists:

For instant updates check out the links below and FOLLOW me on social media where you can stay up to date on new episodes.
FOLLOW US:

pool liner,pool liner repair,pool liner coming out of track,pool liner wrinkles,pool liner patch,pool liners for inground pools,pool liner pad,pool liner wrinkles plunger,pool liner wrinkles on wall,pool liner wrinkles bottom,pool liner wrinkles after rain,pool liner wrinkles problems,pool liner wrinkles on floor,intex pool liner wrinkles,inground pool liner wrinkles,vinyl pool liner wrinkles,install pool liner without wrinkles,my pool liner has wrinkles

[frederickhaaken]

Just did this today. It works, but my installer should have fixed this to begin with

[yorkie]

Thanks. It worked so well. Much better. Not even one wrinkle left. Thank you

[RobertBebee-qy]

Did it today in Buffalo. Worked perfectly. Definitely will take time

[jackcarvis]

I'll try it next spring, thank you

[corygray]

Thanks! Discovered a wrinkle yesterday, while using a plunger to remove wrinkle is there a possibility another wrinkle(s) may form?

[aafunmedia]

I have a round 10'x30" above ground Intex and I discovered a sharp edge protruding at the bottom of the pool. It's probably a small rock but I dont want it to break the liner. Is there a way to push that rock back into the dirt without breaking the pool or do I have to drain the pool just because of that rock? Thank you for any help provided

[andrealetzkus]

We assembled our Intex style above ground pool and did not get the liner completely flattened out before water company came to fill and we ended up with six long creases in bottom of the pool. Could we apply the same concept to remove those creases? It is 52 inches in height. Would it be easier to remove some of the water before we try and use the plunger?

[christophermallilo]

can i do this with a pool i just drained or does in need a significant amount of water?

[rogersnapp-laplace]

My inground 16’x32’ pool developed a seam separation on each side of the shallow end steps where the floor meets the wall. For whatever reason the floor vinyl has shifted toward the deep end thus pulling the floor further away from the wall creating more tension on the vinyl material at that juncture.
My question is if I can pull the floor vinyl back to the wall to eliminate this pull?
I lowered the water level in order to do the two patches. If I refilled the pool up to the bottom of the steps and used a solar cover to warm the water above 90 degrees to promote more stretching, is there a good chance of succeeding in repositioning the floor material all the way up to the wall? I guess all I can do is try. Or would I be better advised to lower the water even more before trying to pull the floor material back into place? Has anyone else ever had this happen?

[robwasnj]

Neat video but a better question for me is why do you have wrinkles in the first place? Hard to believe people using the pool can create wrinkles. I've seen low pH cause wrinkling or ground water get under the liner and cause them (or wrinkles there from the original installation)

[jend]

What if the wrinkle is on the sides of the pool?

[edfritz]

Did you use a mask & snorkel? I have these long wrinkles that I want to get out in the shallow end, but I can't stay under water longer enough. Lol.

[andhappy]

I have drained my pool completely and would like to get the wrinkles out before refilling. Is this a good idea? What’s the best way to do this?

[ray.a]

What happens if u have multiple 6 inch wrinkles heavy wrinkles I mean???

[digitalchimpuk]

I'm more impressed that you got a water mark on the lens that was already submerged! 😂

[HerFisherman]

Our liner came down and now the sand has moved causing a concave under the liner on the floor of the pool. How can we move the sand under the liner to fill the hole? Thanks

[chrystalslayton]

Well... I think i might have just learned WHERE or HOW i got wrinkles in my liner. Unfortunately, maybe even too late. I have a lot, maybe around 50 or more. New since openeing this summer. I'm praying this is my problem, and that i dont have a leak in my liner thats causing them. 😬 i showed my adult son this video and told him to stop freaking jumping in the dang pool 😡

[BradleyKesler]

My vacuum sucked up the liner and caused a wrinkle. Hope this helps

[taylorgoins]

Here’s a thought. Something I’ve always done is just threaded a cone fitting down in the skimmer, hooked a vac hose to it and grabbed the wrinkle and pulled it. Easy money.

[kellihinkle]

What if you don’t have those shoes... or a pool