TBS Discovery - Extended arms and crash

preview_player
Показать описание
I'm a meticulous builder and make sure everything is 100% before I fly, but even I can make silly mistakes sometimes.
Even though the motor bolts were tight, they made their way loose because I didn't use threadlock and eventually, one motor came off. That and the GPS/compass pole wasn't secured.

Damage..... none :)

TBS Discovery
Extended arms - now 580mm
Eagle Tree Vector
ImmersionRC 600mw VTX
Fatshark 600TVL
GoPro Hero 3+ Black
Fatshark Attitude V2
Tiger MT2216 900kv
ZTW Spider 30a ESC
Рекомендации по теме
Комментарии
Автор

is there a lot of jello with the extended arms?, Do you use 1 piece spacers or 2 piece spacers under the arms?, thanks again, looks nice with those

MiamiJato
Автор

how bout the extended t iger motor arms they make for DJI?, also, how much flight time can you get with 12 inch props on

MiamiJato
Автор

An old video, did you get it flying again, i am about to build a TBS clone, do you know if a multistar 4s 5200 will fit in the frame

julianhumphrey
Автор

want to build same setup wihth 6s and tiger arms with 400kv and 12 inch props, hopefully get 25 mins....

MiamiJato
Автор

13 inches were probably a bit too much for 980 KV motors. I will later on go with 580KV + 13 inch + 6s battery

theapexsingularity
Автор

what flight times were you getting withthis set-up? what battery are you using? thanks

MiamiJato
Автор

yep someone forgot to threadlock there motors) awesome there was no damage
didnt you try the other cf round ext arms on that once ?

TheUnDeRGRouNDHoBo
Автор

To high to soon? Least the damage want to bad

JakeBullit