Never Lose It Again #shorts #tipcentric

How to fix your allen wrench to your angle grinder so you never lose it again.

#tips #tools #youtubeshorts #tipcentric

[NMI-TECTB]

Расскажите кто-нибудь этому придурку, что на болгарку нужен другой ключ! 🤦‍♀️

[danielkoresh]

I use bare hands to change a disk. it is easyer

[frivolousd]

Who the F leaves the handle on a grinder?

[OneRoomShed]

Just want to say for all the peeps saying or thinking he's using the wrong tool to remove the wheel, DeWalt is now supplying this Allen wrench with these grinders. There no spanner wrench. 2 of the 4 holes are sized for this Allen Key. I know this because I just bought one the other week. I'm only saying this because half the comments are "your using the wrong tool" and "use the supplied wrench". This is the supplied tool.

[gerardocollazo]

That is the correct tool that DeWalt recomend, when you buy the grinder it comes with the tool included

[masonbeveridge]

My angle grinder has a holder thank you for sharing

[thatRBX]

U can just put the wheels on by hand and take them off the same way. You don't even need a spanner

[pauldiesel]

You need a spanner wrench with the 2 pins, not an allen key. Good luck trying to remove/install a disc with your solution!

[ALRS-ru]

Примотай изолентой ключ к сетевому проводу в 50 сантиметрах от входа шнура в инструмент.
Лучшего способа ещё никто не придумал.
А ещё лучше поставь специальную гайку. Там ключ вообще не нужен

[mecqmnm]

Между гайком и диском сверху бумажку в форме круга сделай и руками всегда сможешь откручивать🎉

[chriswright]

good tip. I use hot glue and/or magnets to make holders for all kinds of small things or to add some grip to anything I don't want to move. never thought of this one.

[patrickbledsoe]

Thats kinda cool better than most of these type of videos but most of us use are hands to do this

[olafjenidba]

Давно не пользуемся ключами для маленькой УШМ, да и на большой болгарки он нужен редко, с ключом лишние хлопоты.

[RedHaloManiac]

I prefer the wrench because I just zip tie it to the cord. Can’t believe dewalt tried to make something better but only made it worse

[edwardmcdermott]

I just tape it to the cord with electrical tape

[tomthompson]

weld a washer on the long end, cable tie it to the power cord two feet from the plug end job done.

[edwardlittle]

Mine came with the wrench socket built right in the handle already so I don't need to worry about this.

[NoneNone-ouvp]

Why do people think hot glue is a cure for everything.

[Batman-nfnn]

For the ones here, If Dewalt is including that allen wrench with a grinder, most be for something other than removing the discs...., you need one with the two pins..., which should be in the box, UNLESS, some mor0n is packing it with the wrong tool at the plant

[EBAL_VASH_ROT]

Шестигранник конечно нужен, но это же только кожух регулировать) но никак не диск затягивать...