How to Change your Generator's Carburetor

These step-by-step instructions will teach you how to change the carburetor on a WEN Generator.

Applies to the following WEN models:
Model 56352
Model 56400
Model 56405
Model 56475

[eljefecitobarca]

*100% best **Generater.Systems** I have used. A test for hurricane prep here in Louisiana: three AC units, 5000, 5000 & 8000, 3 fridges, 2 device power setups, 4 flat screens....AND I had 40% of the power meter to spare.*

[wdaub]

I have a Generac GP7500E made is 2014. The engine was surging/hunting. Cleaning the carburetor with spray stuff didn't fix the problem so I decided to change the carburetor, $100 for parts, 2 day shipping and sales tax. These directions were PERFECT. It saved me time and Hundreds of Dollars. THANK YOU SO MUCH!

[GC-kwgq]

I bought a little powermate couple years ago & just recently tried to start it up. Stored it covered outside in dry Arizona - but the carburetor linkage had corroded solid in wide open position.

Boy, did it ever start up. Hope engine does not require a gentle break in period haha

Ordered a new carb for $19.99. Pretty much the same as video showed - thanks for instructions

[domesd]

Excellent video, 17 year old generator runs perfectly again.

[davidslagle]

Thanks so much. Very helpful. Got my generator going again today with your help.

[smokeye]

Just changed the carb on my Harber Freight generator, same carburetor. Great video

[felixsoto]

Great video, now I can replace the carburetor with confidence. Thank you!

[JoeNocella]

Very Helpful! I just repaired my generator with the help of this video. Thanks.

[sarabear]

Smooth and quiet for standard gas/propane generator

[shadyfieldhomestead]

On my generator, I think the polling rod is in the correct spot. However, the regulating spring has a few different holes and I am not sure where it needs to go. I'm not talking about holes for the regulating springs on the actual carburetor, but on the other end of the regulating spring. I want to make sure I am on the correct setting so that I do not burn anything up. When I first got the generator it burned up the coil and spark plug. I replaced those items and then noticed that the choke lever on the carburetor was broken. Anyway, the company sent me a whole new carburetor assembly as it was under warranty. Do you know which setting/hole it should be on?

[selfresponder]

Hi, is there another gasket on the other side of the carburetor?

[mariomessinese]

For the 2350 is there any kind of mixture screw adjustment on the carburetor? It runs a little rich @ sea level. It's about a year old has a few hours on it. It's been great other than that. And over the weekend it was running at 5600 ft . I know there is elevation kits.. but I'm just wondering if there's a mixture screw? Or am I blind cuz I cannot see it.

[kumak]

thank you.
I would like to see a video of the Powerland PD10000E 10000 16hp 420cc Generator Carburetor Carb I have. Thank you.

[robertzumstein]

It would have been nice to see how the idle control lever is actually put together,
I have a multiquip ga 6hea, . Kinda the same kinda not
Put new carb on now it just surges back and forth plus leaks fuel, idle control not working

[DearToSucceed.]

Can't believe I actually paid money to do this before.

[turbobuick]

I didn't see the first gasket go onto the intake before the carb went on.

[dale]

i have a vacume choke that won't open up all the way so it runs smooth what is wrong?

[elbeto]

What if it don't start n pops loudly when I try n start it n blows black smoke???

[EchoKilo]

I just ordered your dual fuel 11, 000w generator, I live just over 3000' in elevation. Will a high altitude conversion kit be necessary?

[vinny]

Thanks for posting, you saved my but.