What to Know About the Bluetooth Remote Display for Go Power MPPT Solar Charge Controllers

Click for more info and reviews of this Go Power Solar Charge Controllers:
Check out some similar Solar Charge Controllers options:

Don’t forget to subscribe!


And as you can see, you have your LCD screen. You do have your up button, your down button, your enter button, your back button. And then on the backside, you're gonna have your RJ12 connectors. Now this is going to include the trim piece that you will install over this display once you have it installed. So you can see that, again, it's gonna have a nice clean look when you have this installed and that trim over it.

And it's also going to come with two mounting screws and then a roll of RJ12 cable, and then a quick start guide. Now let me give you some overall measurements here. I'm going to turn this on the back side, it's gonna be a little bit easier here to measure with. So the overall length of this display, we're gonna be sitting right at 4 and about 3/8 inches long. And by the way, the distance between those mounting holes, according to the instruction manual, they report that it is at 4.1 inches, the distance between those mounting holes.


That's the Go Power MPPT solar charge controller, 30 amp and 12 volt to 24 volt. You can find that on our website using item number GP72RR. Well, that's going to conclude our look today at this Bluetooth remote display for Go Power MPPT solar charge controllers. Again, my name is Andy. Thank you for joining me..