BLENDING SILVER HOODS WITH PPG ENVIROBASE

Watch some white pearl tips here!
WATERBASED TWO TONE"
-~-~~-~~~-~~-~-

I DON'T RECOMMEND BLENDING MOST HOODS, I RATHER REFINISH THE WHOLE HOOD AND BLEND FENDERS BUT I WANTED TO SHOW YOU THAT IT CAN BE DONE I HOPE THIS IS USEFUL!
PLEASE FEEL FREE TO HELP ME SHARE THIS VIDEOS! THAT WAY I CAN KEEP DOING THEM !

clear: iwata ws 400 13hd

IF YOU TYPE IN THIS HASHTAG #motivatedpainters on youtube you will be able to see ALL MY VIDEOS!! CHANCES ARE YOU HAVEN'T SEEN THEM ALL AND I KNOW THAT YOU WILL GET TONS OF VALUE FROM LOOKING THROUGH THEM!

[mrmuskey]

This is very hard to explain, but here goes.
I heard your comment about not over applying clear on the fenders, cause it will likely darken the panel to the adjacent panel after the papers removed. This happens, and hears the fix. I recently learned, before sanding the panel use compound and polish the area where the fender and door seam is. Polish about a foot into each panel. Now you have a very clean area to prep. Its crazy, and makes very little sense, but it works. I didn’t believe it until they took a headlight and compounded half the light, then water sanded the whole light, Applied clear, the area that was previously sanded was jet clear, the other was muddy. As I said, I didn’t believe it either, now i always do it, especially on high met….once you try it you will see with your own eyes. I used to water sand with a little soap and yet it still darkened and I never new why, its cause the paint is so dirty even on a vehicle that’s a year old. Cheers!

[briansanders]

Nice blend Gab. I agree like to paint the whole hood when I can. Where I am located I use solvent base

materials. I never shot any water borne product.

[MrFlintmica]

Ever use t490 to do blends? Usually I’ll cover a panel in t490 clear base, and with silvers I’ll add 10% more thinner (water) just helps my silvers moddle less. I also do double control coats. T490 works on good blends very well though. Cheers!

[spoolinperformance]

i turn my fan in 2.5 turns from full wide. i find theres a deadspot at full open fan on the ws400

[pasxalistrakas]

a nice video with useful information, which guides us a great teacher thyself the job! another a very good job!!!

[TheChronicRhythm]

I'm using an older gun(lph400) and when I blast clear that high(over 28 pounds, ) I get way more overspray and less material actually on the surface.

[dimitridam]

Blend vids are the most interest and colormatching because its dificult..nice class.un abrazo

[spmillar]

grate vidios please keep them comming realy enjoy them we can all learn somthing new from each other

[giozoomzoom]

Nice job...I love ppg, now I used glasurit and is no the same ....2 are good but love more ppg

[marshallpulham]

I almost like these original videos more some times they are not as refined but i love them

[delexxi]

Os it really necessary to zblend or paint the hood. To shoot a front cover... the way the bumper falls away from the hood should distract from a 100%butt match. And do just the tips of fender where itmeets the bumper. ? Envirobase is new too me.. so im curious about this. It would be an extremely rare case to blend out a hood. For a front cover replacement... and getting the insurance co. To cough up the bucks is another story entirely... butgreat video... not challenging it. Just curious.. about it asWater is new too me or rather about to be

[jasonalexander]

You make getting the offsets look easy. Any tips on getting paint and clear in all the offsets ?thanks again for the great videos

[agelomurgia]

I'm a painter.
Thanks for your videos

[agelomurgia]

you did a great job.
The problem of metallic grays is that they stain and the sun is seen

[Jerseygaragenj]

So there is no way to get a good blending looking in a silver hood??

[remingtonatcheson]

I know you can use any gun for anything and make it work or suites your style but I thought generally you'd use a sata hvlp gun not rp for metallic base? would love your thoughts on this thanks

[james]

when you say control coat in general you are keeping gun further away to keep the metallic upright and random?
Then you would be going to coat to dusting on blend area?
For solvent based, does inter-coat clear help?
I think water they say works better for blending in general.
Thank you

[Val-mmgd]

Great video and tips, turned out awesome and I see your using a sata 5000 which tip?

[carsandbeatzofficial]

Why didn't you use a wet bed for bleeding here? Or is it not needed always? I'm trying to learn to blend silver and all these different videos of some using a wet bed and some not are confusing me. Please help

[larrysoto]

Where can we buy the blowers? And what's the reason for different colors?