How to repair mouse double click, scroll wheel issue in 2 minutes

preview_player
Показать описание
In this video I will show you how to fix your mouse double click and scroll wheel issue. This video is for beginners and requires no advance knowledge about electronics.

––––––––––––––––––––––––––––––
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
––––––––––––––––––––––––––––––

#mouseRepair #doubleClick #scrollWheelIssue
Рекомендации по теме
Комментарии
Автор

I expected it will not work but it fixed my mouse. Highly recommended. Thank you

halcyon
Автор

Bless your nation for your cuisine and tech tutorials.

pqofuqy
Автор

Worked flawlessly and it's pretty much my first time trying to fix a mouse. Best of all, i have like other three G203 stored with similar issues which i probably could get working just as well! Thank you so much for this guide.

ArmoniteQL
Автор

Something interesting I found is that if I hit the button hard a few dozen times, the double click issue goes away. It's probably the oxidized layer coming off from the copper plate. Not sure how permanent this fix is though, I may have to do it again in a few months if the issue comes back. The same goes for the scroll wheel. Sometimes it scrolled in the opposite direction so I hit it a few dozen times hard and scrolled it pretty vigorously for a while and it seems it fixed that too. Again, probably not a permanent solution, but hey, it seems to be working fine now so I'm happy.

bgtubber
Автор

If your mouse is not broken and its double clicking, just blow through the mouse it will be fixed, works for me.

spidey
Автор

I did't opened the mouse but i used a dropper and pin pointed the scroll whell to drop rubbing alcohol. It worked like charm.

ShivasishKhan
Автор

Thank you! this worked for me. need more WD40 than I expected to fix the wheel pots. but this is so helpful. my G102 came back to life.

KyserbrigOnline
Автор

This works! I used this method for fixing my glitching scroll. Thanks!

kaustubhbhoir
Автор

WARNING GUYS -> Make sure you don’t get the wd-40 solution to your optical sensor, i sprayed generously and it flowed down to the sensor. I had to disassemble the sensor and dry it out with alcohol to make it work again. Apart from that the solution is legit to make the switches work

saiffeb
Автор

thanks man it worked on Rapoo MT750S saved my mouse i purchased 5 to 6 months before... i was scroll issue it just fixed with oil

m_zeeshan_aslam
Автор

Bro, you just saved the universe. Thanks! Never thought it could be this simple.

felixliewhan
Автор

Blowing compressed air inside a button from the top, will fix it. I fixed 2 g102 mouses that way. No need for spraying any liquid inside.

amisauto
Автор

Thank you so much brother. It actually worked for me. After suffering for more than a week finally I was able to open my G102 and spray some liquid with alcohol after that it is working fine, smoothly.
Just got some issue with mouse skates. I had to be very careful about that.
so whoever wants to try it, remove carefully those skates otherwise you have to buy new skates for you mouse.

Moshiur.Rahman
Автор

since i dont have that solution i tried petroleum jelly and it works!

justiceforashgoton
Автор

I didn't open the mouse, and just sprayed deodorant through the gap into the scroll wheel, and it working like charm✌🏻

AviatorBro
Автор

Dear author!
Thanks a lot for your video, it's quite a simple way to repair the annoying wheel issue. A simple WD-40 and a tiny screwdriver could do miracles.
With best wishes

aluproduction
Автор

I ripped out the rubber of my scroll wheel because its melting and dust and dirts just sticks on it.
then I cleaned my desk, placed my g102 on it in up sidedown position, held it in my hand making sure the scroll wheel is making contacts on the desk I started sliding the mouse up and down, this rubs the scroll wheel up and down removing any possible dirt and grime on it, keep doing it until it fixes scrolling issue.

zerosick
Автор

Thanks it worked like a charm, man you saved me some bucks

ByteMavericks
Автор

May I know what mm of screwdriver were you using??

Dasthrak
Автор

BRUH u saved my 40$ FOR BUYING THE NEW mouse THANK YOU god bless
you bro

leopangestu