ACR press platforms RLS Zoomlock MAX Mueller ACR

Overview of the current field of press fittings for the hvac and refrigeration contractor.

[adammaglio]

Great comparison and insight. Thanks for the video!

[matthewbracknell]

Very well explained I have been really leaning on Milwaukee I like the double crimp and brand fittings but RLS has the experience in press fittings

[pipepro]

Very good break down of all the systems bought a complete system rls when it came out but got away from it slso back in the day did not take the prep part as the most important aspect as we do now.

What are you doing at the coil condenser and filter dryer still spot brazing or cutting hubs off and just brazing filter dryer thanks

[JBK]

Very helpful video.
Perhaps you could do an update in terms of using RLS jaws on Milwaukee press tools

[Roadkill]

How do you still feel about them 2 years later? I'm having problems finding RLS at my local suppliers in Michigan

[tylermccubbin]

How are you pressing to the outdoor unit? I bought the streamline there isn’t enough copper to cut the swage end off and put a fittings in. Fan coils I can cut off and press in side the case.

[vicenteherrera]

I’m a lead residential hvac installer and thinking about buying the zoom lock rls 1/4 to 7/8 is it still a good system to use??

[rickw]

So.. can I use my 3/4" in propress jaw for 7/8 zoomlock max fittings?

[FourMe]

I am going to buy a press tool for HVAC purposes. I currently have a Ridgid RP 241 tool for plumbing pressing. I see they have jaws for HVAC. Tru Tech Tools has a $500 discount for them. Before I purchase this I would appreciate your feed back. Ultimately I would like to buy the best tool. If RLS jaws for my Ridgid isn't the best then I would buy another brand (gun and jaws) if you think that would be best. You favor the RLS in this video but maybe your thoughts have changed since you filmed this. Thank you. BTW great videos

[fcsdfw]

So is Zoomlock Max and Maxipro the same?

[EPCNELSON]

It would be cool if everybody is on the same standard all these different jaws is the exact reason I don’t want one

[schlz]

could you touch on pressing to service valves? I would be curious if people are having success with RLS press to service valves?