How Do You Pour Multiple Resin Layers?

On today's Video Friday we are talking layers!

Whether you're fixing an imperfection in your first layer, embedding objects, covering areas of high relief, pouring into a mold, deep panel or dam, or you simply like the look of a thick coating of ArtResin, there are 2 different methods you can choose from. Here they are:

The 24 hour method:
You may choose to use this method if you need to repair an imperfection in the first coat, or if you want to add embellishments in between your layers. IMPORTANT NOTE: With this method, creating some tooth on the cured resin layer is key so that the fresh resin layer will bond to the first, otherwise your two layers will not properly bond and could eventually separate. This tooth can be achieved by sanding or by adding an embellishment ( such as painting ) to your dried resin layer.

- Once your first layer is fully dry, either paint on it, apply objects, or simply give the piece an overall sanding with coarse sand paper ( be sure to sand out an imperfection if you have one )
- Wipe away all the sanding residue, then pour on your next 1/8" layer.
- Torch out bubbles, cover and let this layer dry.
- Repeat these steps as many times as you'd like.

The 3-5 hour method:
You may choose this method to save time on a piece of art that requires multiple layers, or if you want to embed objects in between resin layers.
- wait 3-5 hours until your first layer of ArtResin reaches a jelly like stage.
- Add objects if desired, then pour on your next 1/8" layer
- torch out bubbles, cover, wait 3-5 hrs and repeat until you reach the height you desire.

Keep in mind that our recommendation of a 72hr cure time is based on a 1/8" layer. The thicker your layers are, the longer the cure time will be. It could take up to 10 days for a full cure, depending on how many layers you've poured.

Questions?
Comments?
Let us know below!!

[Reddington]

Finally just a simple explanation on how to do this.

[markthomas]

Thank you for making such an infomative, to the point and well presented video.

[johnmackey]

Such a great brief video. I can't stand it when people film 30-minute videos on simple topics and you have to find the 5 seconds for the answer to your question.

[RyRy]

Making a river table (for the first time) and the frame I made leaked... It was a catastrophe... This is exactly the info I needed to know about doing a second pour! Thank you!

[EdenAirafyd]

I've been wanting to make pens and this was a godsend, thank you!!

[heatherbarnett]

Wow, thanks for this info, always thought I had to wait till hardened then run down before next layer, so good to know. Thanks

[sephervin]

"Thank god that's over" xD Exactly the answers I was looking for, thanx!

[kd]

Exactly the information I needed to recieve :)

[jirace]

It's probably a good idea to pour the resin of the second layer then place the items in the wet resin then pour more over the top, so there are no trapped air bubbles under the objects.

[Katka_art]

can i do it with artwork also? sand and add second layer? looks pretty scary when you see those scratches from sanding ...

[dereklady]

I want to use alcohol ink on dried resin, and add another layer of resin on top of that. I want the ink to flow on a smooth surface and I don't think that would work if I sanded the resin. Should I paint and sand around it for the second layer? Can I use a clear UV varnish over the alcohol ink and then add the second layer of resin over everything?

[benthomson]

Sanding between coats after the resin has reached initial cure gives a mechanical bond. Pouring your second coat before initial cure creates a chemical bond. At least that is what I have learned regarding other brands of resin. I’m no expert but just sharing my knowledge.

[Ellalaroo]

I am brand new to this. I used an 18” X 24” wood board to attempt a grid. The whole things is messed up so I want to cove it up and try again. After I sand the whole thing can I apply gesso as a new back drop onto of the sanded resin to start over🤦‍♀️

[lexy]

Does art resin cure rock hard? I need to make shelves for a salon 1” deep mold

[MsNalie]

If i mixed up solutions A and B, and i am going to use the 3 to 5 hrs method layering, how will i keep the rest of my resin from hardening because i still need to wait for 3 to 5 hrs before pouring my next layer?

[violetspider_]

But if it's clear should i still scratch with sandpaper? Would i be able to see clearly throughout the entire thing all the way to the bottom?

[FredFagan]

I think I need to layer in order t o cover fairy lights on a flat sheet. First time out I could not get the lights wires to remain flat with one pour. What would be the best way to enbed fairy lights into a flat sheet and keeping their wires flat so I could pour another layer? Sure could use some adult guidance. :)

[sarthak]

Hello mam, when I poured my second layer after sanding the first one all the sanding marks disappeared but after full cure and demoulding I can see the sanding marks from every angle that were made on my first layer. It's my first time making clear casting. Hoping for some suggestions from your end . thank you.

[robertburns]

This is sooo helpful to this trial-and-error beginner. Is there a chrome/mirror dye or epoxy that can be used as a layer in a project like this?

[lynneboyer]

I need to fix a resin pour project. there's a few errors and marks on the surface. After I sand the original resin top, do I use the same amount of resin I used on the initial pour?