A-iPower APW2700; Unbox and Starting Your New Pressure Washer

A thorough look at opening, prepping and starting your new APW2700 A-iPower Pressure Washer.

This includes showing all your included accessories, adding your oil, selecting proper nozzle, connecting hoses and using your new pressure washer.

Learn more about A-iPower Pressure Washers here:

[jsmadray]

APW2700:

1) For anyone wondering how to set the idle screw to factory, it is 15 complete 360-degree turns counter-clockwise from fully seated position.
2) For the pilot air/fuel mixture screw (black plastic screw on the carb), it is 4-1/2 turns counter-clockwise from fully seated position.

Due to optimal emission settings from the factory, these aren't recommended to be adjusted from their factory settings, but if by chance they have gone off their factory setting for some reason, the info above will help.

[shemarhimselff]

How do i replace the lil thing at the back for the soap?

[asa]

Hi
I like my pressure wash but could you please add video for oil change. I bought it last year Do we need to do oil change

[ontarioman]

Bought one from Costco. The nozzle leaks and there no pressure from the pump. Will be returning

[sonicboomin]

i want to add quick connectors to pressure hose and handle, is it M22 14mm or 15mm?

[oneman]

How do you adjust the bleeder valve to the left of the bottom water connection?

[whiskersspot]

Put oil, gas, on switch, turned gas to right, other switch to left, and won’t turn on?

[sellerjax]

Hi. I see two places for putting oil. Both have yellow screw on plugs. One has the dip stick and other does not. I started putting oil in the holes that doesn't have a dip stick. Is that ok?

[learnsomething]

The nozzle blows off as soon as I press the trigger, what causes that?

[jsmadray]

When I try filling the 0.6 L of oil through the filler hole as shown in this video, it only takes about 300 mL and keeps running back out.

[christopherwalcott]

Is this a 1/4" connection from hose to wand?

[MrVarendra]

I purchased one of these and its not 2700psi

[jsmadray]

Any advice on adjusting the idle? Approximately how many turns counter-clockwise from when the idle screw is turned right in and jamming? I am sure there is an approximate setting at the factory. Thanks so much for any help with this.

[ijustlooking]

I've had this for a couple years now, and I have so much trouble with it. Twice I've had to take it to get the carb cleaned out after sitting for long period of time. I notice in you video that it tends to vibrate and move around, it shouldn't do that, mine does it to. I have to put something ( a towel) under the foot so it stays put and doesn't bounce it's way into my pool. Also, it's so hard to start, runs rough, and if I put the choke in the off position, like in this video, the engine shuts off. Can anyone help me understand why I am having all these problems?
Thanks.

[OrlandoSmith]

The MUSIC is too loud. Can not hear the comments. This video should be done over.