SuperPro Poly Bushings vs Rubber Bushings! Which bushing is best for your suspension?

The purpose of this video is to clear up the misconceptions that surround both polyurethane bushings and rubber bushings. Specifically looking at the use of rubber bushings in standard and aftermarket applications compared to SuperPro polyurethane bushings.

[SpeedyGonzales]

Can I get a polyurethane Bushing for my hip replacement

[scorpio_]

That movement by the rubber bushing maintains a certain level of ride quality and comfort in your car. Unless you are tracking your car where you require really stiff, precise suspension, you have no need for polyurethane bushings.

[gearhead]

Got the squeak out of my poly control arm bushings... Got rid of them along with body mounts, engine mounts, trans mounts, mainly because they make of a harsher ride on my 69 nova cruiser.

[michaellarcom]

I have a question on the lower control arms is the Polly or rubber bushing bonded to the steel guide pin through the bushing?. After about a year should it break free from the poly or rubber and move freely in their the bush he looks great but the steel guide is not gripping the poly or rubber?

[Shadowwolf]

How long do you warranty the ball joints on your control arms?

[horseshoe]

i installed superpro bushes into my ba xr6 falcon . it made the ride very harsh. i had to sell the car. it was a kit for that car, and how was i supposed to know of the bush hardness. never again will i use poly bushes. just imagine how the poly hard bushes are causing stresses to the car frame etc.

[crxdelsolsir]

I respect the informative video but the rubber bushing on that suspension component is much more complex than just looking at the movement and concluding it is inferior (more tyre wear etc).
Manufacturers can just make a flat surface rubber bushing that has little to no movement if movement is the measure of quality and stability in suspension.
However, they do not and instead make intricately designed bushes. You can see the shape is by design and intricate with crafted space on horizontal axis but little space on the vertical axis (not to mention the shape of the connective rubber inside) and not simply just filled in.
This construction is allowing intended deflection and controlled movement where required under load and changes characteristics on increasing loads.

[dmightymick]

So Australia doesn’t manufacture any aftermarket products for first gen Toyota Tundra 2000-2006.

[esnevip]

Was looking forward to having knurling inside my bushings but after ordering a whole host of them for my car, none had it, all smooth.

[IliadTactical]

I'm sure it's proprietary, but what type of poly do you use? MDI? TDI?

[KYNQxEdz]

How much duro for polyurethane to retain comfort?

[nnr]

I have read on some install articles that they use teflon liners inside the bushing to prevent binding once the grease runs out. I am sure you have researched about this. Is there any reason you don't use teflon in your products?

[chrispompano]

How does Super Pro compare to Del-A-Lum Delrin Bushings - ???

[cameronwright]

Has anyone done a full poly bush kit for a honda accord euro r cl7 2003 ?

[nobody-xtzg]

3:10 When there is replacement bushing to Tesla model 3 lower arms??
Teslas really wear out bushing like no one else!!.
It woule be really nice to change medium 80 sha in front lower arms and hard 95 sha on rear upper arms.
And i mean oem replacement, there is only on place in EU that makes poly bushing to replace wear or cracked bushing and its on ukraine

[yukippe]

Hi I am thinking about replacing stock sway bar mount rubber bushings on my 2004 BMW E46 325i with SuperPro bushings, but my concern is if one-wheel bump would become harsher. Any ideas? Thanks.

[theayatollahofrockandrollah]

I run a SuperPro roller stopper kit under my boosted Mitsubishi...no complaints at all

[GOKHANDILEK]

What do you think of SuperPro bushes for diff bushes in FGs? Does it make a lot of road noise and harshness compared to factory OEM ones?

[organix]

Hi guys, how long have you been using different grades of polyurethane for? I bought the kit for the is200 in 2017 but I’m only just fitting them now

[JohnDoe-yhgi]

Do you make for 2019 and above subaru xv?