Garmin Striker 4 A-Scope Tutorial | What is A-Scope?

Learn about the A-Scope feature on your Garmin Striker 4 Fishfinder.
Follow along as we go over what the A-Scope is, How to add the A-Scope to your screen, How the A-Scope works, and Why the A-Scope is useful for you as a angler. Use the Garmin Striker 4 and A-Scope to help you catch more fish.

***Get your Garmin Striker 4 Here...CHEAP***

Fishfinder Mounts:

Transducer Mounting:

Battery Options:

Accessories:

^ Above Are Associate Links ^

[Tylerbrown]

Thanks for these videos, the end where you explain the number in the bottom right for how bit your cone is, is what I was missing. That’ll at least narrow things down for me

[garym.whipple]

This is the best explanation of how a fish finder works I’ve found on YouTube. As a total beginner I had no idea how to understand the info. On the screen.I now feel ready to get on my boat and use my new Garmin striker 4.Great video.Thank you.

[Chrisgreece]

What a nice video!Congrats Paul!
All your video are fantastic. Thanks Thanks Thanks

[bobcarr]

That was really helpful , will try that in next couple of days in my kayak down here in New Zealand

[scotmclellan]

Thanks Paul. Really appreciate this video, loved seeing the distance the A scope cone covers. Cheers Sir!

[Offthegridfishing]

Really helped thanks I didn’t know where to cast when id see fish on my screen

[АэролодкиКурсаэро]

В России г Иркутске на озере Байкал все рыбаки активно пользуются Гармин 4+ Ловят омуля с глубины 150-200 метров до дна бывает 1000+ метров. Ваши видео огонь 🔥 информативны и полезны

[maquina_e_pesca]

Muito bem explicado, o gráfico ajuda bastante... Um abração Brasil

[ajlee]

How do you change the cone diameter to read in ft? Mine shows meters.

[bojidarkostov]

Great information, thanks very much.
Will check this.I am from Bulgaria.
Thanks again 👍👍👍

[stevestewart]

So how do you discern which way to cast, to the left or too the right or straight below?

[eddiebreeden]

A question...please. I just purchased and installed the Striker plus 4. I'm trying to setup the alarm to sound when nearing a weigh point but the system only shows miles for distance. How can this be changed to feet? Any advice would be appreciated. Thanks for the help and I enjoy the tutorials.

[LoveFishing]

Great video! Question: How do you identify structure on your A scope?

[snowbank]

Thanks for the help. Added a scope to traditional view but cannot add to clearview ?
Thanks for ur help.

[jammyjammy]

Great video! You mentioned the fish close to the bottom get blend with bottom structures, I think that's why I didn't see bottom fish on my striker 7sv. I will turn on AScope to see how it helps. Could you please share more tips on how to find fish close to the bottom on my fish finder? I normally do bottom fishing and sometimes I know for sure there are fishes under my kayak, however I didn't see them on fish finder. Thanks very much!

[rxnz]

How do you go from the oval-ish A-scope lines to straight lines? Compare 2:40 to 3:00

[joshuasmith]

A-scope is so helpful for vertical jigging.

[tktoken]

Man this was helpful, great video man. Tight lines!

[Qlayertwo]

Can you aim the sonar cone to cover what’s in front of you vs just below you

[coltonwickstrom]

Thanks for the info, I have an particular issue.. I just rigged up my kayak with a Garmin striker 4 cv and took it out for the first time today and for some reason the traditional sonar would only work if the depth was 10ft or deeper.. while if I tried to switch over to Clearview, the depth would just flash and I would get no returns at all. I tried messing with the gain feature, depth range set to auto, noise reduction turned off, messed with the surface interference settings and made sure the transducer is flat with no gaps as I used your in-hull transducer mount technique with the duct seal if that helps. Thanks in advance.