Thermo Aquatuner Tutorial | Oxygen Not Included

A lot of tutorial for such a tiny device.

End Screen music: When Johnny Comes Marching Home by Cooper Cannell

---
Coordinates: V-SFRZ-C-469570110-8VW3

Mods:
Show Building Ranges by Stephen
Bigger Camera Zoom Out by Cairath
Pliers Fixed by oDr4gONo & pt_djefferson(Rus)

---

---
Echo’s Gear
(Stuff I use and would recommend - Affiliate links)

Disclaimer: These are Amazon Affiliate links, if you make a purchase using them, I will earn a small commission at no additional cost to you.

[US]

A+ for putting the reference shots up front. SUPER helpful.

[jamesguerinot]

I remember when I first started playing oni and was super intimidated by them. Definitely a good tutorial for newer players, even more seasoned can learn new things too.

[MaxTheDragon]

If you have enough of the liquid available that you use as coolant, you can instead of the buffer tank have one cooling loop if you use a liquid reservoir and put the liquid pipe thermosensor right after it in the loop. That way, you can have the aquatuner run when the reservoir contents is too hot. The 14-degree cooler blobs will flow into the reservoir first and equalize with the rest of its contents. You can then set the thermosensor to any temperature (that the liquid supports) you like to have the room cooled at exactly.

[dunning-kruger]

I have nearly 1000 hours and you’ve solved a mystery for me. I leave my aqua tuner on during filling. This means I get a 50-50 cooling as an extra blob always hits the bypass bridge.

[Lapi_Putyva]

You can't make a perfect tutorial in 12 seconds.
Echo: hold my teacup

[kaihanstein]

About the bridge issue: The intake of the bridge, the box with the arrow, acts like a IF-THEN-ELSE decider. Its not a crossing (anymore). If you just connect pipes to different directions, the stuff will be split up. But if you have "an arrow box", then its like FIRST go inside whatever the box directing the stuff to go to and only if its not possible, go the other way (if possible). It took me a while to understand that. (Kudos to ERG for the always amazing content.)

[queenkalero]

I finally managed to do this! Thank you! Thank you! Thank you! Don't think I'd ever have gotten this far without your help!

[stevedavidjohnson]

I struggled to get my head around the liquid bypass but thank you very much for explaining it just waiting the holidays to play ONI.

[ashtwenty]

I do really like your tutorials. Frankly I just like how you go through things. Chill and focused, great combo.
Ps easier content, between series?

[wolfrunner_]

I'm so glad I found this gem of a channel. So much useful information, and the challenge videos are also pretty cool

[AkouBudo]

Freaking crap where have you and this video been the last 300 hours. So much help! Thank you!!!

[overlordkye]

Tell me a nerd without telling me you're a nerd:
"Wait, that was 27 minutes?? Another, another!" :'D

For real though, the aquatuner is such a game changer. It opens up so many possibilities, the late game would be almost impossible without it. This was such a thorough tutorial, but that's a good thing when it comes to such a critical piece of equipment. A+, and thank you.

[TheLewie]

The term transferring chill is absolutely killing me. The laws of thermodynamics say hot travels to cold always. You have heat transfer. Always heat transfer. End rant, thanks, great vid 👍

[queenkalero]

Thank you! I'm, for the first time ever, over five hundred cycles and these things intimidate me lol. I'm going to do it though. I'm making it to space soon.

[jaken]

I honest watched a lot of videos of oni, I’m always exploring new builds and lots more. There’s always something new and something undiscovered. This is by far one of the best video and explanation I’ve seen. Please don’t stop !
Best of luck and I hope to see more

[Mark-xtjp]

I would avoid using polluted water in the tuner room. When it turns to steam, polluted water leaves a little dirt, and if that gets hot enough, it will turn into a solid block which can short circuit your cooling. If you have some oil or petroleum I think that will work fine with water.

[kornkid]

Don't be sorry for talking that long... trust me it helps people understand wtf to do when utilizing these things. I've been stuck at this mid-game point forever trying to understand exactly how to get the right flow going to get this up and running and I finally get it. Thank you

[BlehMehe]

I watched all your tutorial in 1 month and i can say one thing " THANK YOU" you really saved most of my problems and confusion that i had.

[richardhollis]

This is SO helpful! Thanks very much for this!

[TZ]

Omg this tutorial is GOD TIER, it shows hot he started the aquatuner setup, and explained everything perfectly, love it