DIY regrind cams for mio FULL RACE, HIGH LIFT, LONG DURATION

DIY REGRIND CAMSHAFT FOR MIO
LONG DURATION
HIGH LIFT
FULL RACE
RACE SPECS
63bigvalves pin1.5

[pauljanssen]

When there's a language barrier is best to play😊

[johncliffordhinalao]

Galing very informative at useful👏🔥 More power sir

[paradiselost]

no template so you can at least be consistent?

eyeball engineering may work, but at what cost?

i hate to think of what those valves are going through...

[edgarcontreras]

🖐 Saludos.. Amigo: Cuanto tiene de Lift en Admisión y Cuanto tiene de Escape?? Qué Duración tiene a 0.50 ?? Para ver si me Sirve para Mí Motor 200

[whahahahaha-pvcb]

boss anong magandang sukat regrind cams raider pcc daily use daily waswas sana masagut

[lawrence]

Idol pa advice Naman po Kung maganda ba itong nabili Kong cams.
MAX LIFT 9.2 IN. 9.1 EX.
Long duration 108° LSA

ang mga ilalagay na pyesa 66mm block, 22/25 4 Big valves, stock stroke 58.7mm
Para sa Sniper 155vva

[snd]

kahit hindi magkaparehas ang base circle ng intake tsaka sanexhaust basta same lift duration ok parin ba? kasi minsan di maiiwasan na masobrahan pagka grind

[jimmyedquibal]

Ganda ng gawa mo idol sana makapag pagawa ako sayu

[engkokko]

Boss bka pwdi ako bumilo sayo lalagyan mo ng cam para sa bench drill

[miospeed]

Boss tingen mo ok ba pang touring Ang 7.0 7.3 na cam or 7.5 alin sa tatlo mas recommended mo

[nilmtb]

Verify lang po. Pano po tataas ang lift kung nag bawas ng material sa intake and exhaust?

[juansaid]

what was the original duration and lift?

[jeffreymaliwat]

Bossko san po kayo nakakabili nang holder nang cam na gamit mo? Or diy mo lang yan bossko?

[jayadventures]

Magkano po pagpaparegrind ng cams ng suzuki skydrive 125? Thank you po

[JoshuaApolinar-mx]

Boss ano sukat ng dics mo pang regrind

[michaelangelogodoy]

Sir ano po magandang tappet clearance for 7.7 cam 63 big valve ?

[SofiaAndStacy]

May benta ka pang full race boss 7.8mm sporty

[czarinacharrisebien]

boss anong touring cams size ang pwede sa rusi RFI 175cc ?

[gthunter]

boss baka po pwede bumili sa iyo nan ganyan po yung pang regrind po na nagawa na yung gagamitin nalang

[raoulangelicoreyes]

Pag nag 7.5 cams need ba tabas rocker arm stock ?