KORE 3 BIG BRAKE UPGRADE!!!!! (LS SWAPPED GBODY) @PENNYLS1

How to install C5 brakes on Gbody with Belltech 2 inch drop spindles.
YES N90s WILL CLEAR THE CALIPERS!

GM S10 BLAZER, 1998-2005, Ø325mm C5/C6

Year One Cast Aluminum N90 Wheel Kit (4) 17" x 8" with 4-1/4" Backspacing

Belltech 2" Drop Spindles 1998-2003 S-10 Chevy Blazer/GMC Jimmy

QA1Rear Coilovers

Irish Marcelle Productions
Equipment used for production
iPhone 13 Pro Max
Rode Videomicro(shotgun mic)
Movo Edge RXD (wireless mic)
iPad Pro 11inch
Lumafusion
Beats by: Crank Lucas

[DIAVLO]

I did the samething tom my 1984 buick regal but i used the 2005 c6 z51 calipers and disck brakes as well as the same brackets you are using and sane belltech drop spindles. Only issues i ran into the belltech spindles is i has to drill the upper ball joint hole on the spindles a bit bigger because i couldn't get the ball joint to sit far enough to put the cotter pin in after tightening the nut on and i also had to do it to the out tie rod hole i dont know if its because i ordered the ball joints and tie rods from amazon or what the deal was. I gotofy belltech spindles off of a 2002 2wd extreme blazer. I ordered the stock caliper brake lines but the are a bit to long im thinking of getting the stock blazer brake lines.

[stevenbongiorno]

I got an 86 Pontiac areocoupe. It’s not all stock anymore. It was just a pig. It had no get up and go. I made the decision that I’m not gonna sell it, so I’m making it into what I want. All the suspension had been rebuilt with tubular control arms, and I’m running 2” drop spindles. I wanna go to the Blazer spindle, so I can have better brakes up front. I’ll look into the Belltech spindles. I’ll probably try the stock S-10 calipers first, and see if they’re any better. I’m running 15” race car wheels, and worried about clearance. I plan to run bigger wheels in the future, but I just want to improve my braking for now. Thanks for sharing your advice!

[Dashsgarage]

Very informative video, I already did mine but still ended up watching the whole video. They look good.

[kingloc]

I was gonna ask but I think I just looked an answered my own question? 😂 but I was thinking of using the rotor kit that @87SSBOI is using.. I was gone ask can blazer calipers be used for that set up.. or just go with corvette calipers for that application. 🤷🏽‍♂️

[cadillacslimm]

Is it only the 2wd blazer that can be used? What about the S-10 pick up truck if 2nd

[darrenporsch]

The area you had to grind flat are strengthening ribs they're not for aesthetics but you're not going to affect the integrity of it by taking off the little amount of material you did

[Rahlow]

PennyLS1 are those factory rims you have on there?

[intisity]

Beautiful work what size rim are they thank you so much.

[dorrencereid]

Hello, what year corvette did you use and did you also covert the rear from brums to disc aswell?

[baims]

What vehicle did u get the dropped spindles. Off of? S10?

[garyruth]

Can you use the same master cylinder when change to big brakes

[denalilyfe]

What happen to the brand new doors your where order from summit

[kevinmoore]

Did you have to do anything to the proportion valve

[arialdibouski]

I can't help but notice the caliper mounting bracket looked as if it mounted without grinding.