Desoldering without hot air

Desoldering without hot air and desoldering tools
Tools used in video
Soldering Station: FX-951
Soldering Iron: FM-2028
Soldering Tips: T12-K, T12-BCF2/BCF3
Flux: Mechanic MCN-UV50
Solder wire: 63/37 0.8mm
Other: Copper wire 0.6mm
Microscope: Andonstar ADSM201
Temperature: 315 ~ 400°C (depend on size of components and heatsink area on PCB)
Note: in North America & EU, soldering iron FM-2028 and tips T12 series switch to FM-2027 and T15 series, shape of tips are same

[donvukovic]

I have been soldering for over 60 years and this is the first time seeing this. Thank You for this video.

[Swenser]

looks like top notch low melt solder and great iron and tips. no problem with destroying parts. I'm a butcher. I use crappy solder, irons, and flame gas torch to get stubborn pieces off. One day, I'll learn to use quality equipment for a good job, but for now. I'm a chop shop butcher. Thanks for inspiring to do a more pro job.

[neilaldenarmstrong]

The copper wire trick for the micro USB connector is brilliant and now permanently stored in my mental flash memory! Thanks!

[pdrg]

Hadn't seen the copper wire trick before, kudos, that was clever. And I like that all the players got to take a bow at the end ;-)

[manupaksimanjuntak]

I have 13 years of experience and are very used to soldering and desoldering and actually don't need to use a wide or elongated desoldering tip like in the video, just use a sharp tip. SMD components have 2 to 18 pins that can be removed easily, there are several components such as 8pin is opened by heating the body of the actual component is not recommended, but if the component is definitely damaged it is not a problem, but don't do it on good components

[robotroom]

After watching his video, I tried it myself when recapping an old IIci motherboard. It works well. This trick removed 12 corroded capacitors with no lifted pads or burned boards. Just use lots of flux (with an open window/fume extractor) and lots of solder (for thermal mass).

[ovalwingnut]

That process seemed like the "hot tip" and was a visual treat... Thank you.

[pwarrow]

You are legit the best teacher and the definition of if there is a will there Is a way.

[Appregator]

Thanks for the copper wrap around ic pins trick. Great idea

[bearwithme]

Best soldering techniques channel on YouTube

[tfconfirmedbuthv]

This channel is by far the best soldering tips and general info about soldering channel i’ve ever found

[watchingdanny]

WOW !! Outstanding skill and technique. I'm gonna try these on some scrap computer parts before I feel comfortable but I never even thought it possible. Great video.

[sbellaharris]

What I do with QFP's is using the chisel tip to melt the solder and bend one pin up at a time, but remember to press the chip down while you're bending the pins so it doesn't lift any solder pad that's still soldered to other pins.

[sainttwo]

ваши ролики как произведения искуства)))красиво методично интересно . спасибо 😀

[smash-]

Cool video! The copper wire trick is nice. I have seen it before but never tried it myself. Maybe I will now.

Thanks for sharing a very cool and interesting video. I’m sure it will help lots of people stuck in a bind.

👍🏼

[noviy_polsovatel]

It's suitable only for dead components

[eduardoavila]

The only problem with that techinique is that you heat up too much the components.
With a really controlled hot air unit you can reduce the stress in the heat-sensitive chips

[vdiukuy]

All of that looks really impressive (like Chinese magic ;-)), but a bit tricky for a beginner...;-)
And there's still a big risk to damage the components while trying to remove them like this.
BTW, you can also use Rose alloy instead of ordinary solder to reduce the operating temperature (it's quite a common approach).

[acportrait]

Great video, everything very clean and practical, I loved this technique
Excelente vídeo, tudo muito limpo e prático, adorei esta tecnica

[micheledimaggio]

finally he returned!!! relaxing soldering video :)