filmov
tv
How to reset idle on 2010-2017 Nissan Sentra using Autel Throttle Body (ETB) Re-Learn Procedure

Показать описание
#nissan #highidle #reset #howto #programming #sentra #scanner #tutorial
If you want to try the manual procedure here it is:
Step 1
Without stepping on the gas pedal, turn the ignition switch to on and wait at least two seconds, then turn the ignition switch off and wait 10 seconds. Turn the ignition switch back on for at least two more seconds, then off again.
Step 2
Turn the ignition switch on again and wait two seconds, then off again for 10 seconds. Make sure you can hear the electric motor on the throttle moving at this time. It will make a buzzing sound.
Step 3
Start the engine and run it until it gets to operating temperature. Turn the engine off and wait at least 10 seconds. Without pressing the accelerator, turn the ignition on, but don't start the engine, and wait three seconds.
Step 4
Fully press and release the accelerator pedal five times within five seconds, ending with the pedal completely released. Now press the pedal fully to the floor for 20 seconds, or until the service engine soon light stops blinking and is on solid. Release the pedal within three seconds after the light becomes solid.
Start the engine and let it idle, wait 20 seconds, then rev the engine a few times and make sure the idle returns to normal idle speed.
Check out my social media!!!!!
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
=====================================================================
============================================================
Music in this video
Learn more
Listen ad-free with YouTube Premium
Song-Where We Started
Artist-Lost Sky, Jex
Licensed to YouTube by
AEI (on behalf of NCS); Featherstone Music (publishing), and 1 Music Rights Societies
If you want to try the manual procedure here it is:
Step 1
Without stepping on the gas pedal, turn the ignition switch to on and wait at least two seconds, then turn the ignition switch off and wait 10 seconds. Turn the ignition switch back on for at least two more seconds, then off again.
Step 2
Turn the ignition switch on again and wait two seconds, then off again for 10 seconds. Make sure you can hear the electric motor on the throttle moving at this time. It will make a buzzing sound.
Step 3
Start the engine and run it until it gets to operating temperature. Turn the engine off and wait at least 10 seconds. Without pressing the accelerator, turn the ignition on, but don't start the engine, and wait three seconds.
Step 4
Fully press and release the accelerator pedal five times within five seconds, ending with the pedal completely released. Now press the pedal fully to the floor for 20 seconds, or until the service engine soon light stops blinking and is on solid. Release the pedal within three seconds after the light becomes solid.
Start the engine and let it idle, wait 20 seconds, then rev the engine a few times and make sure the idle returns to normal idle speed.
Check out my social media!!!!!
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
=====================================================================
============================================================
Music in this video
Learn more
Listen ad-free with YouTube Premium
Song-Where We Started
Artist-Lost Sky, Jex
Licensed to YouTube by
AEI (on behalf of NCS); Featherstone Music (publishing), and 1 Music Rights Societies
Комментарии