DSC PowerSeries Neo Alarm System Wiring Instructions - How you can be successful

Jason walks you through the DSC PowerSeries NEO alarm wiring. In this video he is working on the HS2032 alarm panel. He'll be wiring things into the main board such as a HS2LCDENG keypad, an HSM2108 zone expander module, hardwired smoke detectors, an LC-100 motion detector, and a few more just to give you an good idea of what's needed. He takes you from step one of how to mount the board in the cabinet all the way to wiring a detector on a zone of the alarm system.

This is by far one of the most commonly asked questions we get when people call in for technical support. Most people are unaware of where to land wires and this video will make it a little easier for anyone not familiar with the process. This is just another part of video series on how to install a security system.

Please comment in the comments section if you have any questions and be sure to slap that like button and subscribe to our channel for all of our how to videos for some of today's most popular DIY security systems.

If you have pre-sales questions; call us at 888-811-0727

You can also follow us on the following social sites for information, coupon codes, and much more!

[jeradcampbell]

Tell me why I did a certification class in this, but the YouTube video taught me more than the class itself

[javedbarakat]

Dude. Thank you so much.

A client with so much money requested I get an alarm system for him.. truth be told I'm a networking guy.. CCTV.. access control.. servers.. switches..routers...

He purchased this exact brand and detectors!! You just made me so much money haha! Thank you very much, dude. I was nervous about it but I have a very good damn understanding of this setup now. You are a legend! Hope you are doing well, cheers.

[MRrwmac]

Jason obviously has a lot of experience in the field installing systems. He did a great job explaining and demonstrating the connections. Unfortunately the camera was upside down in half of the video. Hopefully his cold has gone away also - haha. Thank you Jason!

[cctvgaurav]

greatjob. keep it up. please make video about programming all device.

[rickturske]

I have replaced several panels with 2GIG takeover modules and every panel I've worked in they have the EOL resistor at the panel. I have wondered about this for quite a while and this video confirms that the other company doesn't know what they are doing. I'm assuming they only put the resistor in at all because they don't know how to program the panel without using the resistor and hence the zone doesn't work properly without the resistor. Obviously the resistor isn't doing anything for them.

[sandrasemente]

Hello,
I have a DSC pk5500 and it has a low battery alarm. My question is: the only battery he has is the black one UP7-12S, 12V-7Ah? I can't get it off the wall, so I don't think it takes other kind of batteries.
Thanks a lot for the help.

[gloproglowingcups]

Do you wire a wireless transceiver module into the corbus?

[drewmurphy]

Does dsc still make hardwired systems or is everything wireless now?

[danladikanyio]

quite explicit but am more interested in the wireless configurations

[ashok]

Jason - how to take a zone off your system permanently. Thanks

[noelr]

Which model would you recommend to replace a pc1616 ua503 v4.6? Mine got hit by lightning.

[frankbear]

In the Red/Black/Yellow/Green group, i have 2 keypads and 4 extension modules. ITs difficult to try and get 4 wires all connected in one color. Can i crimp them all together and just have 1 wire going into these slots? does that make any difference?

[robh]

So the resistors that come with the kit are not necessary?

[teckiful]

If you have 6 expander boards, does all 6 parallel on the main board??

[alanhill]

Hi. I need help wiring a ventcroft Bellbox to my DSC panel the Bellbox terminal are
stab - hold off +. hold of - Run - Trg - Can anyone advise which terminals these go to on the DSC panel
Thank you

[MAbhy-mlcs]

sorry sir I want to ask in my serine there are six cables please help wiring the panel and whether I have to use a resistor

[vidovictatarski]

hello, sorry for my english, I have a question, in a situation when you have more than 1 motion sensor how you connect a tamper switch, paradox alarm system have nc with eol with tamper & wire fault recognition, where they do that with 2 1K ohm resistors conected in series, I would like to do similar thing with dsc

[Meza]

Helpful vid but did how did no-one notice the long explanation of the terminals was filmed upside down!

[electropalsceo]

Jason if you need a job and in the Chicago land area - let me know

[Murdxr]

Just for laughs, you put the 4 wire smoke, yellow wire, in the comm instead of the zone terminal😅.