Samsung Galaxy A11 Screen Replacement | M11

Step by step repair guide on how to repair and replace a broken/cracked/not working lcd touch screen glass display on the Samsung Galaxy A11/M11 Mobile Phone.

Versions : SM-A115F/DS, SM-A115F, SM-A115M, SM-A115M/DS, SM-A115U, SM-A115A, SM-A115AZ, SM-A115U1, SM-A115W, SM-A115AP, SM-S115DL, SM-M115F, SM-M115F/DSN, SM-M115M, SM-M115M/DS

Tools

Guides you May Like

If our video was helpful, you can always support (for $1.99) us by becoming a member. A Joining Member will help us to create more variety of content for the community.

Our Partners

Timestamps
00:00 Intro
00:10 Opening Galaxy A11
00:21 Removing A11 Back Cover
01:24 Removing Shield
01:40 Removing Battery
02:48 Removing Speaker Cover
03:05 Removing Charging Port Board
03:32 Removing Vibrator Motor
03:46 Removing Logic Board
04:50 Removing Ear Piece
05:11 Types Of A11 screen replacements
05:32 Selecting Replacement A11 Screen
05:45 Placing Ear Piece
05:55 Placing Logic Board
07:42 Placing Battery
07:58 Placing Charging Port Board
09:02 Placing Speaker Cover
09:32 Placing Shield
10:00 Testing
10:10 Closing & Back Cover installation

#galaxya11 #crackedscreen #replacement

[Bikeing_with_alvarez]

I've been trying to start a phone repair business at my school for some quick cash but it's working better then I thought thanks for showing me how to fix one of many phones 😊

[jewels.]

Just replaced the battery/screen on my moms A11 phone watching this step by step.. Thank you ♥️♥️♥️

[davidcameron]

I did this and it worked. Had a lot of mistakes but ultimately have a working phone again. Had to install buttons in the new frame. One screw did not want to go back. Finally all screws went back and everything works again. I watched this so many times! Was very helpful. Thank your!

[chinnareid]

I got the frame without the buttons. But it was really easy to transfer, to the new frame ( just be gentle and apply a little heat to unstick) and it works. Thank you for the breakdown, it helped me a lot.

Edit: I didn't have a heat gun. Used a blow dryer on low setting.

[davidcameron]

I followed your video again. This time accidentally disconnected one of the antenna wires from the tiney snap it is crimped to. But soldered it back after much cursing under my breath. The phone is fully functional again. Many thanks!

[WRod]

Awesome video, fallowed all the steps. One thing wasn’t covered, I had to remove the strip for the power and volume bottoms from the old case. The new one did not have it. But all worked out, wife is happy. Thank you so much for the video.

[rotigaming]

Excellent video much better than other videos how to replace display

[MindfulMusings]

For those who were able to buy frames with buttons, where did you purchase your frame & screen combo? We bought a set and the innards didnt fit because it wasnt up to standard sizing. Sent back and looking a new combo.

[elikamil]

thank you very much for the good tutorial sir..

[plasticsman]

You sir are a genius. Thank you for this video.

[Æntaresz]

Sir both use same lcd and frame body? I wanna change my lcd n frame body but seller say a11/m11 do the both same spare parts? ?

[glenjamin]

Thanks for a great video.
You helped me out much friend.

[lexisj]

Why after fixing the screen speaker don't work? What cause the speaker to stop working?

[ILoveGTAV]

I'm watching this on samsung galaxy a11

[TikTok]

Thanks..new sub for a very detailed and informative video. Keep it up mate.

[xxliving_tribunalxx]

1:05 Does any type of heat gun work?

10:12 Does any type of super glue like gorilla glue work for it? I'm just curious because I wanna make sure I don't screw up the button at all.

[karmen]

Could the issue be that i accidentally knocked out the other connectors when the battery qas attached? If so will a another new screen work? Already took it completely apart and tried putting it back. It booted up then turn off. Or did i ruin the battery? Just trying to get it on to get photos.

[haydenhartman]

The heat gun link only shows a soldering kit, is there another part needed to switch the soldering tip to a heat gun?

[Angel-vmsl]

Is this the same as modle: SM-S115DL (GP) trying to figure iut if this is the A11 for getting the right screan to replace looks exatly like the one in video taredowen

[karmen]

Did it and it worked at first but i forgot the buttons. Now the screen just flashes on then off😢