Heat Transfer L4 p3 - Common Boundary Conditions

preview_player
Показать описание

  1. Ron Hugo
  2. Heat Transfer
Рекомендации по теме
Heat Transfer L4 0:12:06

Heat Transfer L4 p3 - Common Boundary Conditions

Heat Transfer (04): 0:45:02

Heat Transfer (04): Heat diffusion equation, boundary conditions, property tables

Heat Transfer: Conduction 0:57:29

Heat Transfer: Conduction Heat Diffusion Equation (3 of 26)

Understanding Conduction and 0:18:21

Understanding Conduction and the Heat Equation

Heat Transfer (03): 0:45:48

Heat Transfer (03): Energy balance problems, thermal conductivity, thermal diffusivity

Heat Flux: Temperature 0:05:45

Heat Flux: Temperature Distribution

Heat Transfer L4 0:08:18

Heat Transfer L4 p1 - General Conduction Analysis

Heat Transfer L31 0:07:40

Heat Transfer L31 p3 - Temperature Distribution in Heat Exchangers

Heat Transfer L2 0:08:02

Heat Transfer L2 p6 - Example Problem - Radiation

Heat Transfer L4 0:20:46

Heat Transfer L4 p2 - Derivation - Heat Diffusion Equation

Heat Transfer (05): 0:35:11

Heat Transfer (05): Heat diffusion examples, 1D conduction in a plane wall

Geodynamics - Lecture 0:04:30

Geodynamics - Lecture 8.1: Time-dependent heat transfer

Temperature Profile in 0:01:30

Temperature Profile in a Fin (Simulation)

Heat Transfer L6 0:12:39

Heat Transfer L6 p3 - Example - Thermal Resistance

[HT-14] 5 minute 0:05:56

[HT-14] 5 minute review - Internal heat generation

Physics - Thermofluids 0:04:27

Physics - Thermofluids - Conduction - Heat Transfer - Double Pane Window - Example 4

Heat Transfer L6 0:10:07

Heat Transfer L6 p5 - R-Value and Thermal Resistance

Heat Transfer L14 0:11:41

Heat Transfer L14 p3 - Lumped Capacitance Method

HT1- Introduction to 0:13:46

HT1- Introduction to HeatTransfer

17.7 Mechanisms of 0:11:51

17.7 Mechanisms of Heat Transfer

Heat Transfer - 0:10:29

Heat Transfer - Conduction - 1D Radial - Steady State - Heat Source

Heat Transfer - 0:18:37

Heat Transfer - Chapter 2 - Example Problem 5 - Solving the Heat Equation with Generation

Heat Transfer L22 0:07:09

Heat Transfer L22 p3 - Bulk Temperature - Constant Heat Flux

Heat Transfer L8 0:10:09

Heat Transfer L8 p3 - Boundary Conditions for the Fin Equation

Комментарии
Автор

Thank you Mr. Hugo. I learn a lot from your videos. Highly recommended to anyone who is struggling in Heat Transfer this subject.

fgms
Автор

My secret weapon to acing my heat transfer class! Haha well not so secret since I’ll tell everyone about your channel. Thanks!

primoperez
Автор

Why does having zero heat flux at the wall make the Temp profile be concave down?

Spacetime_ghost
Автор

Thanks you for the information... It's really helpfull and you teach it very nicely... I didn't understand when the same topic I learn in college

beats
Автор

Hello. In numerical modeling applying at mesh nodes a heat flux what results can give me? For example if a closed-loop heat pump is connected with some pipes which are extracting heat for the ground, can I model the heat exchanger pipes as heat source through a heat flux by defining it at different time-steps based of the building needs or is it better to rather impose the input temperature resulted from power needed and temperature which is coming out from the soil? I don't understand how exactly this initial conditions works and what can I get out from them. I need the difference between inlet/outlet temperature to determine how much of the power needed can the heat pump cover, but I don't know how should I put this into a numerical modelling.

Maybe you can explain it to me or to guide me to some material where I can learn from. Thank you!!

danieliosif
Автор

Thank you for your video! For 3) what would the SS temperature distribution look like past the wall? Would there be a discontinuous jump at the boundary layer like this and asymptotically approach T_inf ?

matthewjames
visit shbcf.ru