Carburetor Vs Fuel injector | Which is Better ? | By Automotive Engine Hindi

preview_player
Показать описание
Carburetor Vs Fuel injector | Which is Better ? | By Automotive Engine Hindi
------------------------------------------------------------------------------------

How Carburetor Works -

In this video, I explained the difference and the advantages,disadvantages between carburetor and fuel injection system.
Unlike carburetors, a Fuel Injection system is comprised of a complex set of electronics and sensors. In carbureted systems the fuel gets drawn from the tank, while in a Fuel Injected system it depends on a fuel pump installed inside the tank for a fine-grained control over fuel flow. The fuel injection nozzle also goes directly inside the combustion chamber. The pressurised fuel is very well atomised as a homogenous mist in case of FI systems, allowing for very efficient and clean combustion.

The fuel supply in case of FI is controlled through an electric brain, or ECU, which constantly makes complex calculations at a very high frequency to deliver the best air-fuel mixture possible. Based on a whole variety of parameters such as engine speed, throttle position, engine temperature and load etc the ECU directs the injectors to let in just the right amount of fuel with every intake stroke to facilitate the most efficient combustion.

Now, while the efficacy of an FI system has been proven to be superior to carburetor, it’s not that the two systems don’t have their distinct advantages and disadvantages. Here, we will discuss the merits and pitfalls of the two systems in brief bullet points.

Advantages Of Carburetors
Carburetors cost less, are simple in operation and easy to repair or replace
Carburetors allow the users to tune them to their requirements
Since carburetors are not integrated into the engines, they can be serviced or replaced without touching the engine
Disadvantages Of Carburetors
Not the most efficient systems, dated design
Most carburetors have a slight lag, which results in relatively slow throttle response
Certain components like diaphragm are relatively delicate and prone to damage
Air fuel mixture fluctuates, affecting engine smoothness
Advantages Of Fuel Injection
Optimised air-fuel mixture and atomisation allows for cleaner, more efficient combustion
Sharper throttle response
Better fuel efficiency and marginally more power than carbureted systems
They are typically maintenance free and does not break down
Disadvantages Of Fuel Injection
Substantially more expensive than carburetors
Cannot be repaired with simple tools, have to be replaced, which is expensive.
Cannot be customised, unless you go for custom ECU maps, which again is expensive
So while the advantages of an FI system are pretty clear despite its cost, you’d still be one among millions who still put their faith in the good old carb. Which tech do you prefer, and why? Do let us know your opinions through comments below.

To understand clearly, please watch the full video.

Your queries👇👇

How carburetor works ?
How FI system works ?
What is the difference between carburetor and fuel injection system
Carburetor vs fuel injector
#Fuelinjection
------------------------------------------------------------------------------------
Thanks for watching🙏🙏🙏
Keep supporting.
Рекомендации по теме
Комментарии
Автор

As a experienced machanic i prefer Carborator

warsiautocare
Автор

I have splendor+ 2019
Carburettor is better
Subah kabhi kabhi thodi problem hoti hai winters me but itta to chalta hai apni bike hai ❤❤❤

hemantstatusadda
Автор

Very well explained but in practical we know carburetor are best #motomentor

MOTOMENTOR
Автор

Carburettors are sensitive to weather changes in the atmosphere making them incompatible in certain weather conditions resulting in decreased power delivery.In the FI system one don't have to worry about anything.But at the same time carburettors are easy and cheaper to maintain as FI system is much more complicated

midhun
Автор

So many thanks for your valuable information 🙏💐💐💐

chandut
Автор

Carborator is best👍💯Fi engien ne mera dimag kharab krke rkha hai 😵‍💫😪 baar baar problems aa rhi hai😢

vincenthembromstofficial
Автор

Helpful Information Given Through This Video... Great Job Brother ❤

Anjum_Kadri_
Автор

In my experience I prefer carburettor.

ovywedx
Автор

Easily consumed ... thanks for the proper explanation!

sandeshb.
Автор

गरीब आदमी के लिए काबुरेटर बरिया था कम पैसा मे बन जाता था

jjmiyki
Автор

Vidyo achi banayi hai. Bhai k liye salute 🎉

rashiddk
Автор

Carburetor Number 1 hai, koi Problems nahi h, fuel injection system wali Bikes me bahut problems Aa rahi h, Sir

mohdshamshul
Автор

Ye jo jyada sensors wali orr jyada electronics wali machines hoti hai inki performance chahe jyada ho, par inki reliability kam hoti hai, inme fault aaje tto agency k bina thik ni hoti.

tarsemkumar
Автор

Bhai me hu rural area vala or muje kheto me bike chalani hoti hai mere liye best disel bullet hu huva hai mene splendor or platina bhi use ki lekin 1 saal me belar ho jati or diseal bullet me 5 saal tak garege nahi jana pada bas oil change karna hota tha bas

uchihacalan
Автор

Fi Technology Is Best 🔥
But But initially this technology should have come in 150 plus cc bikes so that the power and fuel economy of those bikes could have worked better.But this technology should not have been given in bikes less than 150 cc. After the introduction of this technology in bikes of less than 150 cc, the prices of the bikes increased and the parts related to the fuel system installed in them also became expensive. Due to which people started facing problems in their maintenance.*In India, bikes of less than 150 cc are sold the most and are mostly bought by poor to middle class people and are mostly sold in rural areas.Due to new and electronic technology, most of the people do not know about it like its sensors, its parts and how to maintain it, due to which problems arise in the bikes.And after having problems, people take them to nearby mechanics who do not have any training to fix them, and even in the service centers only ordinary mechanics work.If the problem of matching the bike with the customer is not resolved, a huge confusion arises in the customer's mind regarding the fuel injection technology and the bikes related to it. Due to which he refutes this technology.

sherehind
Автор

love your content bhai.. keep up the good work

kunjmakwana
Автор

If any reputed two wheeler brand starts manufacturing carburettor bike/scooter again then most of the customers will prefer only carburettor over FI.

nilagfunnyvideos
Автор

Good TEQNCAL information carburetor is best

tusharswami
Автор

Are yaar gaanv ka garej wala bhi karboretor ko khol ke saf karke thik kar dete he ise to show room me hi leke jana padega to kya fayda yaar is injector sisteym ka

gvtboy
Автор

very good explanation, God bless you brother....

kiranjetty