troubleshooting tankless part one

[mrfield]

You have NO idea how much the last tip in the video helped. Thank you!!

[atguru]

Thanks for your video ! I removed that little blue "water saver" out of the showerhead and it seems like that address the hot cold issue I was getting from the tankless water heater!

[GregChaney-zb]

Great Video. I now know what I need to do for the maintenance of my Rheem Tankless heater.

[xteratogenx]

hell yeah brother! I got it in step 2. I think the re-pressurization once you turn everything back on is what did it. The first faucet I turned on spat out this brown water and then the water came back on HOT in the whole house.

[eleazarbarnett]

It's working again! It was the little filter on the inlet. Thank you for the extremely helpful video👍

[kelseybone]

Any suggestions on how to fix a fill error on a ruud combi boiler?

[matthewfreeland]

Is there a reset after flushing out ?
Can’t get water to through it

[quangvu]

VERY INFORMATIVE... THANK YOU VERY MUCH!!!

[amandaturner]

What about this water heater not turning on at all?

[pistolasnine]

Thank you! Great video and instructions 👌

[timbrowning]

We have a Rinnai that from time to time stops working after a few minutes. We have no codes and it just reads the 120. It doesn’t happen all the time. We also just had it serviced and the tech said he couldn’t find anything wrong. Any suggestions what our problem is? Thanks

[DiegoPerez-hhsz]

How about error code 52?
It says something about checking the harness for the solenoid.. but what is the solenoid.

[steiner]

Really Good. Have a Navien and it just went dark on me. No power to controller. Slight drip from actual Water heater outer casing!! Unplugged, going to open it and see what is leaking, possibly fried the unit?

[FlawlessNavi]

I get Code 12, P1, 12, then P1 again. Any idea what that could be?

[MzladyGrinn]

This video has been a big help for me!
Thank you, so much!

[joeorlando]

Mine - the pressure regulator for the natural gas was stuck. Just tapped the regulator with the handle of a screwdriver and the water heater fired up.

[agualloruben]

I get code c7 and 76. What do they mean?

[VladRonin]

Thank You for video. I have Eccotemp 45 hi - natural gas water heater . Have code E 3. All is OK. Water pressure, gas, vent is clean .. HOW to reset that code.. I Turned OFF power for all day, dont helps. Thanks

[timbrowning]

We have removed the water savers in the shower heads

[goodgate]

Nobody seems to know how to solve Eccotemp problems. Best not to buy one.